How to clean the iron with citric acid? Learning how to clean appliances with folk remedies - Setafi

Instructions on how to clean the iron with citric acid are quite simple. To do this, you need to get a moderately concentrated solution and pour it into the tank. After that, the container is thoroughly washed so that no impurities remain. More detailed cleaning methods and preventive measures are described below.

Internal cleaning

First of all, the iron is cleaned with citric acid from the inside. To do this, they act like this:

1. Measure out 20 g of the product (you can weigh it on a scale or take 3 teaspoons without a slide).
2. Dilute in a glass of hot water.
3. Stir thoroughly until the liquid is completely clear.
4. Then pour this solution into a container and turn on the iron to the maximum.
5. When it reaches the limit, the automatic shutdown system will work.
6. Immediately after that, press the steam boost button.
7. This is done several times until the complete consumption of all liquid.

This is one of the most effective ways, since you can even clean the iron with citric acid from old scale. The principle of operation is quite simple. Particles penetrate into all layers of pollution and tear them off the surface. Then it remains only to rinse the tank with warm clean water. If the clogging is severe, the cleaning is repeated again.

Base cleaning

There is also a way to clean the iron from scale with citric acid from the outside, i.e. sole directly. In this case, the instruction is:

1. First, 600 ml of water are heated, i.e. about 3 cups.
2. Dissolve 60 g of powder in a hot liquid.
3. Mix thoroughly to dissolve well.
4. Put the iron with the sole down in a pan or other container (preferably aluminum).
5. Then gradually pour the solution so that the water does not touch the electrical parts.
6. Leave to stand for 15 minutes.
7. Then wipe with a napkin or cotton pad.
8. Channels where steam flows are treated with cotton swabs.

It is important to understand how to clean the iron with citric acid. You can use any means, but not abrasive, i.e. powdered. The treatment is carried out with a solution or gel, and then wiped with a soft cloth.

Basic Prevention Measures

It is clear how to clean the iron with citric acid. It is quite simple to do this, but in order to save the device, it is recommended to follow the prevention:

1. Only boiled water should be poured into the tank - it is better not to use tap water.
2. Cleaning is carried out periodically. If the iron is used frequently, this should be done every 6 months, i.e. 2 times per year.
3. If the water is hard, it is better to filter it.

Professional products are also used for cleaning, but it is citric acid that helps to cope with scale. If such procedures are periodically carried out, there will be no layers, and the tool will work for a long time.