Bosch washing machine malfunctions are associated with a variety of components. Most often, the drum, cuff wears out, the drain hose, filter or pipe is clogged. Sometimes the door is also blocked or washing programs are violated. In such cases, you need to restart the unit by disconnecting it from the network for 10 minutes. If this does not help, it is recommended to consult a specialist.
The content of the article
- The main types of faults
- Diagnostics and repair
The main types of faults
In general, Bosch models are distinguished by their durability and high build quality, but malfunctions are still possible. The breakdown of the Bosch washing machine, with proper operation, usually does not happen soon. But over time, parts wear out, and problems inevitably arise.
The main types of faults include:
- Problems with the heating element - scale, particles of clothing and detergent form on it. They form a small layer that reduces the ability to conduct heat. Therefore, the heating element begins to heat up more strongly, due to which the spiral deteriorates. This can even lead to a short circuit.
- A malfunction in the operation of the pump is a rare breakdown, mainly due to the fact that various objects from pockets of clothing fall into this element. As a result, the pump jams, the pump breaks.
- Bosch washing machine malfunctions and solutions are also associated with motor brushes. Their surface gradually wears out, so the motor becomes less powerful. As a result, the drum rotates more slowly or stops spinning altogether.
- Violations in the operation of the electronic controller - a serious breakdown that leads to partial or complete loss of device performance. Outwardly, this is manifested by failures in the electronics - it is not possible to configure the program or the device turns off altogether during operation.
- Violation of the door lock system - it does not close completely, there is no click, so the machine does not start the washing process. Or the door may not open already at the end of the process, so it will not work to get things out of it without dismantling.
- Another malfunction of the Bosch washing machine is related to the wear of the hatch cuffs. The seal can be damaged by sharp objects forgotten to be removed from pockets, as well as wear due to vibration during rotation.
- Blockages in the drain system are associated with improper operation, when foreign objects get into the hose. You will need to clean the filters, the pump, the entrance to the sewer, the pipe.
- Over time, shock absorbers also wear out, which soften vibrations and protect other elements, primarily the drum, from premature failure. As a result, the unit starts to make a lot of noise and may fail.
Diagnostics and repair
In some cases, you can determine the specific cause yourself. For example, if the cuff is torn or the door is jammed, it will be visible immediately. You should also focus on the codes that appear on the display. They may vary slightly depending on the model. For example, if the control module is broken, F67 or E67 will appear on the screen.
Some types of faults can be fixed on your own. Even with minimal skills, you can unplug the machine, remove the filter, clean the drain hose, pull out the laundry and evenly distribute it, and trim the legs.
But if the causes of the malfunction of the Bosch washing machine are more serious, it is better to contact the service center. This is required in the event of a breakdown of the electronic control system, incorrect operation of programs, strong noise and vibrations. It is important to understand that blind repair can lead to even greater violations.
