DIY knitting machine repair

click fraud protection

Let's see what the female half of humanity lives with. Today the fashion of knitting needles disappears, it is appropriate to put a knitting machine, the work will be done by itself, if you put a drawing on a punch card, drive it into the memory of a personal computer through special software. The advantage is great, the unit is much faster than human hands, the product is ready before. Experiencing about festoons, other decorative elements, we recommend to stop. Lined up a galaxy of instructional videos on YouTube, help you learn as soon as possible. The product will break, the male half of humanity - sure - is ready to repair knitting machines with their own hands. If, of course, the female gender turns for help. ..

The device of a typical knitting machine of the manual type

Babushkin's sweater became the talk of the town. Mittens, scarves - without this it is difficult to survive the icy Siberian winters.

Instead of considering the repair of Brothers knitting machines, we decided to plunge into Russian, Soviet industry. Patriotic ladies easily master native models. Knitting machines were produced in the USSR.It is easy to find the old Neva-2, 1983 release. The period, which normal people remember happily, is scolded by some: it is impossible to openly get a lot of money, they could ask where they came from. Now it is better, they will come, they will demand to share. .. The instructions provide a dozen of tips on how to knit correctly, first we will write out the knitting machine device:

instagram viewer

  1. The basis of the unit is a table, which resembles a musical synthesizer as two drops of water.
  2. The bed is formed by transverse working grooves, the needles slide back and forth.
  3. At the front of the needle pinned by a rail, screwed a number of bolts to the frame. On the bottom are nuts.
  4. Along the table under the grooves of the groove seal. In order for the needles to not voluntarily slide back and forth, the knitter would be a punishment.
  5. Needle is represented by a crochet, not a needle. There is a snap-in spout.
  6. The main part of the knitting machine is the carriage. Like a shuttle, it flies back and forth, forming even rows of tie. The drive is manual, the craftswoman gets full control.
  7. To prevent the carriage from falling, there are stoppers on the sides of the table. According to the assertions, the craftswomen interfere so much that sometimes it is better to remove the restraints, avoiding to beat the shuttle every time you reach the edge of the canvas.
  8. The carriage in some knitting machines can count rows by switching a mechanical counter. For fixing, proper operation of the mechanism on the table, teeth are cut from the front side; there is one or two gears on the shuttle.

Needle rests on the heel, as expressed by YouTube, heel. Grabbing, it is convenient to push the favorites, making loops skipping( if there is a mode).It is important that the needles do not run away, stand still. Not to mention the cases when you want to throw a loop, making a hole in the right place of the tie. It is possible to get complex drawings, openwork patterns, if you own arithmetic, be able to count loops.

How to use the knitting machine

They understood that the carriage runs back and forth, the knitting machine is devoid of electrical knots. Convenient, self-repair knitting machine is quite simple. Rule number one Neva 2 says: you can not reverse the carriage in the middle of the canvas. Reach the end, come back. Non-observance of the condition causes deformation of the needles, destruction of the needle case. How to change the bent edges on new ones, let's talk. Note that the carriage should move smoothly, without jerks. The new knitting machine is tugovato. Normally, it will take time before the carriage is developed.

The knitting machine is set to the density, must match the thread number. Otherwise, the heels of the needles will be clogged, which can lead to lifting above the table. Causes skipping of adjacent stitches in the skip mode( when the needles are pushed towards you, a special lever is pressed on the carriage).The situation is complicated by the fact that today they forget to write a number on the coils. However, the thickness of the threads is different. How to determine the desired mode? Check with the seller.

The counter reset button should not be pressed while driving. Leads to breakdown. Neva 2 cannot be kept in the sun for a long time, the needle case will collapse. A simple list of rules for the operation of the device.

Knitting machine

The hook needle is called a reed. The knitting process is based on moving the sting back and forth along the grooves of the needle bed. On the sides of the needle platinum. Hooks with a point pointing to the floor, pulling the new loop downwards. Now let’s try to explain with the fingers how to get the row:

  1. There is an old loop drawn down by platinum.
  2. The thread is laid by the craftswoman above the needles.
  3. The needle slides forward, the old loop slides back, released by the tongue.
  4. The needle goes under the thread, grabs a hook when moving backwards.
  5. The thread retracts into the old loop.
  6. Top thread is covered with platinum, which at the sides pull down.

The cycle repeats again. In Niva 2, patiently you need to manually lay a thread, in the fifth model is done automatically. In the carriage five wedges. Two control the movement of the needle down, two - the top. One wedge - medium - is responsible for the mating density. Platinum rises by pressing on the heel.

Knitting machine has ceased to knit

When sticking the carriage first thing to note is whether there is grease. It is necessary to apply a layer on the rails, under each platinum, facilitating sliding. It is appropriate to remind, periodically it is necessary to clean the knitting machine. Rails are unscrewed, needles are removed, after the heels of platinum are lifted. You can gently clean the space under them.

Similarly, the elimination of defective needles, which are raised when the extension is made. Heels slightly shorter than normal. The rails are removed, loosened, to remove the defective parts. At the same time it is possible to do the needles sliding back. To eliminate the effect under the rail there is a spring, it happens that the steel tension is weakened by the mechanical fatigue of the alloy.

It is allowed to lay the oiled thread in several layers in the longitudinal groove of the needle bed across the needles. It is necessary to check the effectiveness of the measures taken. Part of the needles is put back, the rail is pressed by the hand, trial release is conducted. If there is no slip back, the knitting machine is fully assembled.

At jamming of the carriage we pay attention to plastic tongues. The surface is worn out, replace the parts. The cause is a cut-off device( a part that brings the needles to the desired position along the carriage), the ends of which are unbent. Should bend properly. When knitting with thick yarn, sometimes a piece of cloth is taken out from under the platinum. Unscrew the screw that presses the carriage, take the shuttle out of the working area. The canvas is set back manually.

Here are some of the faults described in detail in the manual:

  • If the carriage moves too tight, or the yarn is too thick, or the density is not enough, the chosen thickness of the thread.
  • Frequent loops reset means: the strap of the front part of the knitting machine hook is set incorrectly.
  • Individual needles do not form loops if the tongue is broken or the needle is deformed. It should be replaced with a new one.
  • Vertical stripe of the web is obtained when platinum does not work properly, it sticks. Try to lubricate as stated above. Does not help - replace the part. The rail is removed, pressed down from the bottom of the quickdraw. Platinum stretches on itself and in the side. Must get off, after you can put a new one.
  • Platinum falls out, faulty deflection.
  • The counter has stopped counting, the lever is loose. Pull up. The lever must touch the carriage, otherwise there will be no counting. Pay attention to the slide. Sometimes gives the slack, ceasing to hurt the counter lever.
  • Sometimes a needle bed can be scratched by wedges of a knitting carriage. It is worth tightening the mounting screws in this case.

So, do-it-yourself knitting machine repair is a reality. Nothing complicated or supernatural, but it becomes possible to quickly complete artistic work. What could break? Write in the comments that! We will think, we will try to answer the question. A knitting machine repairman is not always needed if savvy is in his bosom.

We want to say goodbye: avoid breaking the instructions, get working. For lubrication, use oil suitable for sewing machines. Knit yourself, teach your relatives, make real masterpieces. Download instructions online!

Which music center is better to buy

Which music center is better to buyAppliances

There is a chance to buy a Sony music center - forget the dimensions, think about the power. If we throw aside the number of channels, the reproduced frequencies, the type of media remains, the ...

Read More
Music center do it yourself

Music center do it yourselfAppliances

Today on the network are discussing a few ideas on how to make a music center with your own hands. On our portal we decided to keep up with life, put our ideas together, and present the result to...

Read More
Home Theater Installation

Home Theater InstallationAppliances

It is worth starting with instructions, which list of supported standards. The owner of the home theater should clearly understand: a lot of formats have been created that store the image, in add...

Read More
Instagram story viewer