How to repair an electric kettle yourself

And for the most part, people who decide to make repairs on their own, are wondering "how to repair the electric kettle at home."The answer to this question is not as simple as it may seem at first glance, but we will try to present it in brief form in the following sentences.

The principle of operation and the scheme of the electric kettle

The principle on which the electric kettle works is simple. In order to warm the water, it uses an electric heating element installed inside - at the bottom of the device. Such an element may have a different shape. But, as a rule, it is attached to the body using threaded sleeves and metal screws, tightly pressing it to the waterproof seals.

Waterproof kettle seals have a different shape. For example, they can be presented in the form of a washer, gasket, or, conversely, have the form of a sleeve. It is because of them that leaks often occur. In the event of a breakdown of the seal of this type of repairing the electric kettle is quite simple, it is necessary to replace it.

The operation of an electric kettle is based on the principle of heating water, at the time of reproduction of which steam is formed, which goes out through special holes or pipes, to a biometric plate or to a disk. Its movement depends on how the electric kettle works. After steam supply to the biometric plates, the kettle turns off automatically.

Tip:

Read also: How to repair a convection oven with your own hands

The protective element of the electric kettle

Note that in every modern model of electric kettle there is a special protective element. It turns off the home appliance at the moment when boiling water occurs or when there is no water. The presence of a protective element reduces the risk of accidents, such as the risk of accidental fire.

Before, many people, having forgotten to pour water into a classic kettle, turned it on. It is this kind of forgetfulness that caused a fairly large number of accidents. This, in turn, led manufacturers of electrical appliances to develop a modern security system - creating a function to automatically turn off the kettle at the time of heating its existing water. There is no water - the kettle will not turn on.

Disassembling the electric kettle

Before proceeding with the disassembly procedure of the electric kettle, we need to check the most obvious things:

1. Whether the plug is disconnected from the outlet, and whether the buttons on the electric kettle are turned on;
2. Do not twitch the connector, which is responsible for powering the kettle with electricity. If it jerks from side to side, it is possible that this is the reason for the malfunction;
3. Is the kettle positioned correctly, is it on a suitable base, or has it moved off. This is possible, but in rare cases, and it only happens with old models of cordless teapots.

Rules and procedures for disassembling an electric kettle

We conducted with you a check of the most obvious things, and it became clear to us that they did not cause an inoperative condition of the kettle. For this reason, we must proceed to its disassembly, and further identification of the reasons that led to its inoperability.

1. Remove the cover of the base of the kettle;
2. Next, turn off all the screws that belong to the fasteners and are located on the base of the handle of the kettle, as well as in its upper part;
3. Carefully separate the handle from the tea jug, so if from the kettle;
4. After that we need to get rid of the plastic rocker, which is an important component of both modern and old models of electric kettles;
5. Removing all plastic parts, basically getting rid of interfering parts - these are the various components of the kettle that are attached to one or another of its elements;
6. Raise the switch of the kettle;
7. After that, we need to carefully examine the state of the bimetallic plate, checking it for visible defects. If there are none, it means that the reason that caused the inoperability of the kettle lies in another.

Tip:

Read also: Why does the washing machine not heat the water?

Why the kettle slowly heats the water

The reason why the electric kettle can slowly warm the water is the presence of thick layers of scale on its heating element. To remove thick layers of boiling water, we have to buy a cleaning agent, the main purpose of which is to use its basic properties, allowing you to deal with the layers of scum accumulated in it. After purchasing a cleaning agent, we need to read the instructions on its packaging.

It must be remembered that the principle of using one or another type of cleaning agent can be very different for the reason that the manufacturers of such products use different components and additives in their composition.

What to do if the kettle does not turn off

The most obvious reason why the device may not turn off is in a badly closed lid. If your lid is well closed, the reason why your kettle does not turn off is to block the steam-bleed opening.

Yes, blocking the throughput hole is not a common problem, but it also occurs. The fact is that the hole may be clogged with lime deposits that prevent the pair from being redirected to bimetallic plates.

Defective switch at the electric kettle

It happens that the switch of the electric kettle comes to a standstill. Such a problem may be due to the fact that the switch is blocked by the bimetallic plate. The plate can be simply damaged, or the pusher responsible for the switch is stuck.

The switch cannot be replaced by yourself. If the problem of the inoperability of an electric kettle lies in the breakdown of its switch, you will have to contact a specialized company.

In some cases, when a switch is stuck, it must be removed and checked for integrity. This is done simply, but there is only one problem in this task, which lies in finding the switch. If it is on the handle of the electric kettle, then it will not be difficult to detect and remove it, but if in some other place, then there may be difficulties.

The main thing is to correctly unscrew all the bolts and remove the parts that are located at the location of the switch. In general, in most cases, first you have to remove the handle and the lid of the electric kettle - this will facilitate the task of studying the problem, which is associated with its inoperability.

Tip:

See also: Do-it-yourself iron repair: disassemble and repair

What to do when the kettle is leaking

This problem is not uncommon, it occurs with every third electric kettle. That is understandable, electric kettles simply can not withstand constant work for a long time, some, but the detail they have weakened.

1. If the kettle is leaking, then you must immediately detect the essence of the problem. Study the structure of the electric kettle. If you see that there is a broken part in it, then you should immediately contact a specialized service center.
2. It happens that the water indicator is breaking. It is possible to check its condition for the presence of cracks and other joints responsible for leaks, after examining the plastic indicator, after removing the cover, which closes the switch of the electric kettle;
3. Perhaps the problem associated with the flow is associated with the weakening of its heating elements. To resolve this issue, it is enough to tighten the screws and nuts a little, which are the fixings of the classic heating element. If the leakage cannot be resolved, you should immediately contact a specialized service center, whose experts deal with the problems associated with the flow of electric kettles. In extreme cases, the electric kettle can simply be changed by purchasing a more modern model in a household store;
4. It happens that the cause of the flow of an electric kettle is damage to the gasket. If this happens, then know that tightening a number of fasteners will not be able to help eliminate the cause of the leak. The gasket is the cause of leakage is quite rare, but if that happened, it is necessary to replace the burst gasket with a new one. This is the only way to resolve this problem and eliminate the leakage of the electric kettle;
5. Probably the most terrible and unpredictable in every sense of the word problem, which caused a leakage, is bottom damage. Not good news for those who are not accustomed to the fact that electrical things have a peculiarity to break. If that happens, then it is meaningless to hand over the electric kettle to the service center for repairs, you will have nothing left to do, how to get a new electric kettle in the household store. It also makes no sense to repair the kettle on its own - the bottom cannot be repaired and replaced, and only in rare cases when the equipment has a high price does it need to be replaced in accordance with special schemes that are available in every second service center.