Why the dishwasher does not turn on: causes of failure

The main causes of the malfunction

How sad is it when loading a full basket of dirty dishes, you press the cherished “start” button, hoping to go for coffee, but the faithful assistant refuses to work. Moreover, categorically!

What's the matter? The reason may turn out to be stupid, for example: one of your household for some reason pulled the cord out of the net. .. Or, moving the machine a little while cleaning, somehow stuck the same cord under it and it broke from what was transferred by a large weight.technology.

It so happens that it is not a typewriter at all, but a blown outlet to which it is connected.

If so, then everything is not so bad. In the first case, you just need to insert the plug into the outlet, in the second, replace the power cord, and in the third, reconnect the unit to another power source.

But, there are breakdowns and worse and repair goes - more expensive. If the first three reasons are not your case, still remain calm and only calm. You will always have time to call the master, and to diagnose yourself has not harmed anyone yet.

We present you a list of the main reasons why the dishwasher does not start:

• The cord is dropped in a hidden address. The door lock
• is defective.
• pump clogged.

water supply hose suppressed. In general, these are the main causes of breakdowns. Moreover, the third part of them falls on the blown fuses.

And now let's take a closer look at the symptoms of these popular faults and it is possible that it will come out on its own to determine why the dishwasher does not start and the reasons for this.

If the machine does not turn on at all.

In this case, only the following are possible. The

• breaks the cord
• The capacitor
• burned.from the cord.

  cord To do this, you need to arm yourself with a multimeter. We expose the ohmmeter mode on it and connect the probes to the sections of wire of interest.

  If you find that some part of the wire is burnt out, then you should not save and change it by inserting a new piece. Any twist and spike –– fire hazard and unreliable. And this may lead to a subsequent fire or more serious damage inside the car.

  The fuse blown

  To diagnose a capacitor, you will need to disassemble the machine. We recommend previously to cover the floor with a rag, as residual water may be poured from the unit.

  The fuses are a circular pump, under the tray. Therefore, you should disassemble it, following this procedure:

  • Remove the front panel under the
  • door. Remove the side fastenings from the pallet.
  • Open the door, unscrew the debris filter and remove the
  • impeller. Close the door, turn the machine over and remove the debris.on the circular pump
  • Multimeter check the resistance.

  In case of detection of the fact that the fuse is defective, then you need to find completely identical and replace it.

  Faulty lock on the door

  Diagnose it the easiest. Either the door closes or not. If not. ..

  Here, of course, you can't help it. .. Without calling the master, moreover, with a service that has the necessary detail, you will not manage. Of course, if you are very well versed in such breakdowns and know how and how you can replace a broken door part, then you are lucky!

  The start button is faulty.

  If you don’t see clearly that the button looks weird, then it’s hardly the case. Most likely, in another electronics, that is, the control unit. But, if the button is fused or dangles, then it is the culprit. Search for the necessary spare, change or call the master.

  Faulty software block

  This is probably one of the most disgusting and costly breakdowns. The cost of repairs is rather expensive and you will not do it on your own. Have to completely change the unit. But do not rush to sin prematurely until you check all possible options.

  Blown motor or

  relay. The machine will need to be disassembled and these parts checked for electrical conductivity with a multimeter.

  If they burned, the matter is bad. .. These are expensive items, of course.

  If the motor is buzzing, but the dishwasher does not start

  

  • pump clogged
  • motor clogged

  water hose jammed First you need to check the hose. If he is in a normal state, that is, not twisted, then proceed to the inspection of "viscera."

  If there is no visible contamination, then this is not the cause. If obvious dirt is present, clean the parts and try again to start the machine.

  Features of Bosch machines

  Brand is a popular and quite loved by the people. Still, the German quality has not been canceled.

  But, if the Bosch dishwasher does not start, then the reasons may be somewhat different than in other cases. Its design is slightly different.

  Therefore, if you have checked all the diagnostic options offered by us, then you should call the Bosch service center and find out the details.

  Recommendations for use

  Do not neglect the rules described in your typewriter manual. You should not change the special salt for cooking, and special pills for dishwashing with your hands. .. Such a strange saving will leave you sideways and the question “Why the dishwasher does not turn on” will not take long to wait.