I began to notice that over time, the vacuum cleaner suction power garbage deteriorates. Roughly speaking, he begins to work badly. I soon found out that, most likely, the filter is clogged and must be cleaned literally with their own hands. Is it possible to wash the filter from the vacuum cleaner and how to do it correctly? I tell.
types of filters
Before you figure out how to clean the vacuum cleaner filter proposes to determine its species. The detailed characteristics are presented in the table:
Picture | types of filters |
Option 1. Bag. There are permanent and disposable bags (made of the first paper, the latter - of the fabric).
|
|
Option 2. Aqua. For aqua filter vacuum cleaner is characterized by a specific mechanism of action:
The photo - an example of a water purification device. |
|
Option 3. Coarse cleaning. All the dust immediately falls into the bay for large debris, no special filtering. Such equipment should be cleaned after each cleaning.
|
|
Option 4. Electrostatic microfilter / HEPA. Such an output filter for a vacuum cleaner is considered the most reliable. Producers guarantee a 100% quality cleaning. |
|
Option 5. Cyclone. a cylinder, in which due to the centrifugal force are deposited large dust is provided in such a construction. |
Methods for cleaning up
During operation of the device, not just clogged filters, but also other important details: brush, hoses, dust collectors. To clean the vacuum cleaner need to qualitatively:
- tidy filters;
- clean the hose and brush, spend prevention.
3 for receiving cleaning filter
Reception 1. As rinse filter cleaner (cyclone, HEPA, Electrostatic):
Picture | instruction |
Step 1 Unplug the appliance. |
|
step 2 Open the cover and remove the dirty filter.
|
|
step 3 Rinse the filter under running water, if its design allows. |
|
step 4 Dry the item and place it back into the device. |
Reception 2. To wash aquafiltering, follow the following algorithm:
- Disconnect the equipment from the network.
- Remove the bowl of water and rinse it. Pour the new fluid portion.
- Place the design in place.
Admission 3. Clean the vacuum cleaner equipped with a dust bag, easier than all other designs:
- If paper bag set - simply replace it with a new one.
- If synthetic - Empty and wash in a washing machine.
The volume of the bag designed for cleaning to 1 times, so try to devastate the filter after each use of the vacuum cleaner.
Purification details and prevention
How can I clean the vacuum cleaner from dust and all its parts available?
Picture | instruction |
Step 1. Clear the hose Remove the hose and rinse it in under the pressure of a good flow of water.
|
|
Step 2. The cleaning brush dust
|
|
Step 3. wipe housing Slightly damp cloth wipe the surface of the housing. |
To avoid damage to the vacuum cleaner and make it easier to clean it, Try the following suggestions:
- Cleaning of construction debris home appliance is not necessary.
- Regular cleaning dust collectors (preferably after every use).
- Avoid ingestion of sharp objects can damage components or the entire unit as a whole.
- If you find any problems with the functionality of a vacuum cleaner, refer to the master.
Output
We have found that it is possible to clean the dust from most parts of the vacuum cleaner. Particular attention should be paid to the filter, because of its efficiency depends on the purity of floor coverings, and hence the air in the room.
Videos in this article clearly shows how to clean the filter from the vacuum cleaner. Ask your questions in the comments - I will answer with pleasure.