TOP 9 major manufacturers of slabs


  1. Knauf
  2. LLC "Volma"
  3. Magma LLC
  4. Peshelansky Gypsum Plant LLC
  5. JSC "Gipsopolymer"
  6. CJSC "Samara gypsum plant"
  7. JSC "Belgips"
  8. OJSC Gypsum Concrete
  9. Sverdlovsk Gypsum Products Plant JSC

For the erection of internal partitions, slabs are increasingly used. They are easy to install, light, cheap, eco-friendly and vapor-permeable, perfectly manageable and do not carry significant loads on the floors of the house. To take advantage of all these advantages and build a long-lasting reliable partition, experienced specialists advise to pay attention when choosing not only the dimensions and declared properties of the material, but also to its name manufacturer. We will dwell on the largest companies specializing in the manufacture of slabs.


German companyKnaufis one of the leading players in the world and domestic market of slabs. The history of the enterprise began in the 30s of the last century with the processing of natural gypsum, was later opened plant for the production of dry building mixtures on the basis of gypsum, then a plant for the production of gypsum plasterboard sheets. The enterprise was developing rapidly, and today it is a

buy instagram followers
group of companies, offering solutions in the field of dry construction, produces materials for insulation and finishing. Knauf is a guarantee of the highest quality, as the factories use the most modern and precise equipment, constant strict control of compliance with strict standards.

Pazogrebnevye slabs of the company are differentideal geometry and highest accuracy of alignment, which allows you to quickly and easily build partitions even for beginners in this matter. The assortment of the company isstandard and waterproof boards with a thickness of 80 and 100 mm.For the highest quality you need to pay - stand pazogrebnevye plates of the company more expensive than domestic counterparts.

LLC "Volma"

Pazogrebnevye plates under the trademark "Volma" occupy more than half of the domestic market and enjoy growing demand. Releases their plant inVolgograd, existing since 1943. Today, the company's production facilities are located in several cities of Russia and are engaged in production plasters, assembly mixtures, tile adhesives, primers, heat-insulating materials, plasterboard and pile-groove plates. Over the past few years, production volumes of the latter have been increased several times, as the demand for products is constantly growing.


The popularity of the "Volma" slabs is explained by their high quality - experts consider the company's productsA worthy alternative to the German leader of the sphereKnauf, but at the same time, domestic products are much cheaper. The company claims that it was able to achieve this success through customer orientation, continuous improvement and a systematic approach.

Work with slabs of the company easily, they allow you to achieve excellent results. Are issuedfull-bodied and hollow, standard and moisture-proof boards with a thickness of 80 and 100 mm. Plates thickness of 100 mm in the midst of construction work is not so easy to find on sale. The manufacturer adds fiberglass to the product to increase strength. The presence of hollow slabs with significantly less weight and better heat and sound insulation characteristics distinguishes domestic products against the background of the European one.

Magma LLC

A large domestic manufacturer of slabs Magma LLC is included inthe composition of the group of companies "Magma"whose factories are engaged in the extraction and processing of various minerals. Magma LLC specializes in the production of gypsum boards, dry construction mortars and slabs. The latter are familiar to customers as "MAGMA-gipsplits". Since the company uses excellent raw materials, proven technologies and modern equipment, the quality of the products is high.

Pazogrebnevye plates of the company appeared on the market only in 2012, but already managed to gain popularity among builders. Products are praised forstrength, reliability, good geometryand appearance. Conveniently, the plates can be completed with special adhesive manufacturer. The assortment is presentedstandard and moisture resistant slabs, full and hollow 80 mm thick.

Peshelansky Gypsum Plant LLC


The plant was built in 1933 on the basis of a gypsum deposit and specialized in extraction and primary processing of gypsum. The gypsum mined here was always of very high quality, so the slabs, which began to be produced here in 2002, were durable and reliable. Production is constantly being improved and modernized, volumes of manufactured products and its range are growing. Own raw materials base in combination with new equipment and the desire to create the highest quality products has ensured the enterprise success in the domestic market.

At the moment the manufacturer producesplates with a thickness of 80 mm. They may behollow or full-bodied, moisture-resistant and standard. Feature of the company - manufacturingschungite slabs. They are made to order, their cost is 2 times higher than conventional plates, but the properties are unique: suppressing the growth and multiplication of viruses and bacteria, reducing the level of electromagnetic radiation.

JSC "Gipsopolymer"

Since 1953 the enterprise specializes in the production of gypsum sheets. Cooperation with nuclear power enterprises already in those years allocated the plant and allowed us to talk about a high production culture and the highest quality of products. Today the enterprise boastsown raw material base and the availability of a full production cycle.It uses modern high-tech equipment, innovations, the range of products and its volumes are constantly expanding. The plant produces plasters and putties, assembly mixtures and self-leveling floors, as well as gypsum building and slabs.

At the moment, the range of slabs of the manufacturer includesfull and hollow slabs 80 mm thick standard and moisture resistant, andfull-bodied moisture-proof and standard plates 100 mm thick. All products are characterized by good geometry and easy installation.

CJSC "Samara gypsum plant"

The company deservedly is one of the largest in the gypsum industry. He has been working since 1944, during the Soviet times he was the leader in his field, producing a record number of products. Today the plant offers dry construction mixtures and gypsum products, which is used in 13 different industries and is exported to the markets of the near abroad.

In 2003, the production of slabs was mastered and since then their range has been constantly expanding. The company issuessmall-sized(600 * 300 mm) andstandard(667 * 500 mm)slabs. Presented are ordinary and moisture resistant slabs,thickness 80 and 100 mm.High quality and a large selection of products ensures a consistently high demand for the company's products.

JSC "Belgips"

The products of thisof the Belarusian enterpriseis also represented in the domestic market and is in demand. The plant was founded in 1944 and specialized in the production of gypsum and plaster products for construction, later began to produce gypsum partition plates, production was set up drywall. Today the range of products is expanded, but still focused on the production of gypsum and gypsum boards. Quality of products is confirmed by certificates of conformity and awards of various exhibitions.

Pazogrebnevye plates since 2005 let out instandard and waterproof version with a thickness of 80 mm.Their weighty advantage is a smooth smooth surface, so no application of an equalizing layer is required. Production is in accordance with the standard ISO 9001-2001. Now the plant is carrying out a comprehensive modernization, changing equipment, improving the recipe. In 2014, the company was acquired by the company "Volma thanks to which the quality of the products, offered to the buyer under the old trade mark - "Belipsy was significantly improved.

OJSC Gypsum Concrete

The enterprise has been operating since 1963 and today it is one of the leaders in the domestic production of slabs and dry mixes. The product range is small and includes only solidstandard and waterproof boards with a thickness of 80 mm. Despite this, the products received a lot of positive feedback for its correct geometry and precise alignment of the groove and ridge.

Sverdlovsk Gypsum Products Plant JSC

A large Ural enterprise specializes in the production of gypsum products under the trade mark GIFAS. In addition to gypsum products, the company produces dry building mixtures and concrete products. The enterprise has been carrying on the history since 1959 and today has high-tech equipment that allows producing high-quality products. The assortment is presentedfull-bodied standard and moisture resistant slabs 80 mm thick.Products have a smooth surface, precise dimensions, easy to saw and mount.

Tags:Wall panels
Quick replacement brushes on the engine washing machine do it yourself

Quick replacement brushes on the engine washing machine do it yourselfRepair Of

An examplemachines, rarely think about the internal structure of the device. For many, it is important that the unit worked properly. However, in some cases it becomes necessary to study not only t...

Read More
What if the boiler leaks?

What if the boiler leaks?Repair Of

Contents: Causes of problems Troubleshooting options Is it possible to repair a leaking boiler? Conclusion With each there are situations when the equipment fails. T...

Read More
Samsung washing machine gives error 5E: solve the problem yourself

Samsung washing machine gives error 5E: solve the problem yourselfRepair Of

Contents: Error code value 5E Causes of error 5E Methods for resolving error 5e The main stages of the diagnosis Modern Samsung washing machines do not only do their...

Read More
Instagram story viewer