How to move the location of the bath and not flood the neighbors

Content

  • 1 Building Sanitary Requirements
  • 2 Migration Options
  • 3 What to do after redevelopment

Not surprisingly, many apartment owners want to improve their home and make it the most comfortable for themselves. However, you can not arrange thoughtless redevelopment. The movement of the bath must be carefully planned. This is what will be discussed in this article.

Building Sanitary Requirements

So, before starting a redevelopment, familiarize yourself with the following requirements:

  1. The bathtub should be located only above non-residential premises, for example, above the pantry or corridor.
  2. Do not carry bathtubs over kitchens. Actually, this can only be done in two-level rooms or if you live on the ground floor.
  3. Entering a room with a bath is only necessary through the corridor. Entrance from the living room is prohibited.
  4. The floor level must be separated by a threshold or made lower by about 17mm.
  5. Do not forget about the installation of waterproofing materials on the floor.
/
/

Migration Options

instagram viewer

Option number 1. Sketch transfer. If you do not need to expand the size of the room, but simply remove the wall between the bathroom and the toilet, then you can coordinate the transfer according to the sketch.

Option number 2. Transfer by project. This option is a little more complicated than the above. It is suitable if you need to increase the size of the bathroom through the use of other non-residential premises, also, if you need to transfer the bath to another non-residential premises with your the entrance.

/
/
/

What to do after redevelopment

If you still moved the bath, then you must definitely get a legal permit. You need to make updates to the BTI documents. To do this you need:

  1. Contact the inspector of the Moscow Research Institute. To call it, just leave a statement or make a phone call.
  2. Prepare acts of covert work. They should be filled only by construction companies that did the work or the management company of your home.
  3. To prepare the acts of the finished transfer from the inspector of the Ministry of International Relations. After he inspects the apartment and compares your transfer with the agreed transfer and checks the acts of hidden work. Then you need to sign them with the employees of the construction company and give them to the MZHI.
  4. Refer to the BTI technique. He must come to your apartment and take the necessary measurements. You must apply and pay bills in the BTI area.
  5. As a result, you will be issued a finished technical passport BTI with an updated layout. You must check that there are all real changes in the plan, and there should not be any red lines or any marks in the plan.
/
/
/
/
  • How to cut GVL yourself with a simple knifeHow to cut GVL yourself with a simple knife
  • Top 5 Ways Electricians Fool YouTop 5 Ways Electricians Fool You
  • Imitation of wood and wood in the apartmentImitation of wood and wood in the apartment
  • How to cut tiles into skirting boardsHow to cut tiles into skirting boards
  • What house flowers cleanse the air wellWhat house flowers cleanse the air well
  • Why you should not fill 3 D floors yourselfWhy you should not fill 3 D floors yourself
  • Why is it better to abandon the light wallpaper in the hallwayWhy is it better to abandon the light wallpaper in the hallway
  • Decorative pillows: types, sizes and careDecorative pillows: types, sizes and care
  • Than cellular polycarbonate is better than monolithicThan cellular polycarbonate is better than monolithic
  • Is it possible to insulate a balcony without losing usable space?Is it possible to insulate a balcony without losing usable space?
  • Free layout in the interiorFree layout in the interior
  • How to calculate the repair time in order to catch an important eventHow to calculate the repair time in order to catch an important event

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
How to make a hole in a tile without using a special tool

How to make a hole in a tile without using a special toolWith Your Own Hands

Sometimes, when laying tiles, you may need to make a hole in the tile, under various communications. But often, the necessary tool is not at hand. And what to do in such a situation? It is impossi...

Read More
How to make a threshold for a countertop laminate

How to make a threshold for a countertop laminateWith Your Own Hands

Modern flooring should look as harmonious as possible. In order to connect two or more types of floor coverings without sudden changes and crevices, there are special decorative elements - sills. ...

Read More
How to make removable polycarbonate frames for a greenhouse

How to make removable polycarbonate frames for a greenhouseWith Your Own Hands

The summer season is approaching, and many homeowners are thinking about building a greenhouse. In order for the construction to serve more than one year, it is better to make the segments removab...

Read More