Whirlpool washing machine (Virpul): malfunctions and their diagnosis

The Virpul washing machine is considered to be one of the most convenient for washing. Most buyers prefer models of this brand because of their high quality and affordable price. Despite this, washing machines are not immune from possible breakdowns, which will be discussed in this article.

The main malfunctions of the Virpul washing machine

There are a number of problems that are most often noted by users of Virpul washing machines:

• Water retention in the tank after the end of the washing cycle;
• Programs get lost during the washing mode;
• Water does not heat up;
• The appearance of extraneous sounds (cod, vibration, noise, knocking);
• Leaking water during the wash cycle;
• Flaps open spontaneously when unbalanced;
• Corrosion of the top cover.

It is worth noting that the last two problems, as a rule, are typical for Virpul washing machines with vertical loading. Their occurrence is affected by models that have been in operation for more than 3-5 years.

Description of malfunctions of the Virpul washing machine

Before you try to fix the problem yourself or call the wizard, you need to more thoroughly analyze the malfunction:

1. Water retention. This problem appears at the last stage of washing. Its obvious signs are a “frozen” cycle timer and a full tank of soapy water. When you restart the whirlpool machine, the problem repeats again. Do not leave water in the tank in any case, therefore, if a problem occurs, safely remove it using the emergency drain hose.
2. Control Panel Issues. When the device is turned on, no specific data appears on the indicator, while all the lights may flash randomly. In such a situation, the machine must be turned off immediately.
3. Heater does not work. The machine may simply not start the wash cycle because the water has not reached the temperature necessary for this. You can check this by knowing the temperature of the water collected in the drum. To clarify the approximate temperature, drain a little water through the hose. Cold or barely warm water is a clear sign of problems with the heater (heating element). You can read about other causes of cold water. here.
4. Water leakage. As a rule, water in such a situation flows from under the hatch, and after washing, a large puddle appears in front of the machine. The problem usually is the cuff. She girdles the door, helps to close it tightly and traps the water inside. In this case, do not sound the alarm if you notice a few drops on the surface, since this is quite normal. We will talk more about the causes of the leak in this article.
5. Extraneous sounds. Please note that often for outsiders take the natural sounds of the washing cycle. If the sound does not accompany the entire washing procedure, it appears from time to time and, most often, during the intensive operation of the drum, this may indicate that a foreign object has got into the machine. You can read about other reasons why the washing machine is noisy here: https://sovetexpert.ru/prichiny-gromkogo-shuma-v-stiralnoj-mashine.html

Causes of Whirlpool Washing Machine Failures

Having determined the presence of this or that problem, be sure to try to find out its cause - this can help make the right decisions when fixing:

• Water retention. Occurs if your drain pipe, hose, sewage, drain filter is clogged, or if the electric drain pump is broken. Clogged parts can only be checked and cleaned after all laundry and water have been completely removed from the drum.
• Water smudges. Most often occur due to the accumulation of dirty water in the cuff. If this water is not removed on time, the cuff is thinned and bursts or breaks. Gently pull off the center of the cuff and check for continuity. In no case can a damaged element be used - an early replacement is required.
• Control Panel Issues. Usually associated with malfunctions of the control board, and most often it has to be changed. It is impossible to do it yourself - you need to contact the master.
• Water does not heat up. The problem may be a heating element or a thermistor. You yourself can calculate the failed element. For this, it will be necessary to measure the resistance of the contacts of the thermistor and the heating element with a multimeter.
• Noise in a typewriter. Occurs when foreign objects get into the drum. In addition, sometimes one of the elements of the internal structure of the machine may become unusable: it can also create unpleasant noise. Check for foreign objects inside the drum. If possible, then remove the drum itself and check if small objects and parts have got there.
• Spontaneous opening of leaves and corrosion of the top cover. These are problems typical for Virpul washing machines with a vertical load. They arise from prolonged use and are almost inevitable. They can only be solved by replacing old parts.

Problem Codes

For the Virpul washing machine, malfunctions can be displayed as alphanumeric codes on the control panel. Most of these problems can be solved independently:

• F01 (FH). Problems with the level of water inlet (excessively low level or no water in the tank).
• F02. The Aqua Stop function has worked.
• F03 (FP). Automatic drainage did not work.
• F04. Problems with water heating or its complete absence.
• F05. The temperature sensor is not functioning.
• F06. Problems in the engine or tachogenerator.
• F07. Engine control circuit is defective.
• F08. Damage to the water heating element.
• F09. The water level in the tank is exceeded.
• F10. The engine does not spin.
• F11. Communication problems.
• F12. The water in the tank does not heat up or the heating level is low.
• F13. Water does not enter the tank or does not flow fast enough.
• F14. Problems with the control system.
• F15. Damage to the electric motor.
• F16. Failure of the control system or failures in its operation.
• F18. Unsuitable type of washing powder.
• F19. Incorrect mains parameters.
• F20, F21. It works when the controller fails.
• F22. Clogged detergent dispenser, water does not flow.
• F23. Failures at the gulf.
• F24. Lack of control over the water level in the tank.
• F26, F27, F28. Interference in the operation of the electric motor.
• F31. Software update failed.
• Fdl. Hatch lock does not work.
• Fdu. The loading hatch is not tightly covered.

The right choice of the Virpul model - damage prevention (video)

A well-chosen model will help reduce the number of problems with the washing machine. Make a good choice for the Virpul washing machine using the recommendations from the following video:

You can avoid problems by using quality detergents on time cleaning drain filters and carefully handling the washing machine. This is the only way to extend its service life. In the event of malfunctions, you can independently diagnose the breakdown in order to make a decision on further repair.