When it comes to repairs, finishing comes to the point - wall plastering becomes the most important. Properly plastered walls will help to avoid problems with the further decoration of the room and the whole subsequent process will be much simpler.
Convenience and the final quality of work is half dependent on the quality of the surface that will be finished in the future. Just for even greater convenience, you can use the construction grid.
If the wall components with the finishing materials are loosely coupled, this sometimes happens when finishing the external walls, it is better to use mesh reinforcement. In addition, the grid will help with fixing the draft layer for alignment.
In general, grids can be divided into 2 types: metal and plastic. Many types of options exist inside their types, the choice of which will be determined by the specific requirements for repair.
Metal mesh is better to use for exterior decoration, as they are significantly hardy. Plastic ones are also suitable for any kind of work, but when using them you should remember the weight of the plaster - if the layer is too thick, the mesh may fall off.
In addition to the grid options themselves, there are various ways of fastening:
- Application of a mixture for plaster;
- With the help of screws;
- Using dowel nails;
- The use of screws.
For example, if you use a solution as a fastener, the mesh can be pressed into it, in this case the wall will be aligned with sufficient efficiency and the coating will be strong. But if the decoration is decorative, it is better to use other types of fasteners (screws, screws or dowels, nails).
Given the ease of use of the grid, it will help to cope with a number of problems, if, of course, it is attached correctly:
- On the surface, the plaster will hold for a long time;
- There will be no swelling on the plaster;
- After the lapse of time the plaster will not peel off, and its service life will seriously increase;
- Subsequent decoration will be better.
In addition, the construction grid allows you to pay less attention to non-compliance with the temperature level, weaker respect the proportions of the solution and so on.
The total is obtained if you do not want to go too deep into the requirements for plaster or have a small experience, but want to finish the walls yourself - the use of building mesh will be fully justified. If the volumes are planned to be small - it is better to buy from small sellers, and with large numbers it is already better to turn to manufacturing enterprises to save money.
-
Why you should not replace the ondulin brand horse with a metal one
-
Sandwich panels: economy, practicality, attractiveness
-
Types of insulation for a loggia
-
What natural materials will replace the OSB plate
-
How to make the foam does not expand much
-
What are the hidden flaws in aerated concrete
-
Which flooring can fall through quickly
-
What pipes are not suitable for laying a cold pipeline
-
Pitfalls of sprayable insulation
-
Plumbing seals: varieties, characteristics and application
-
Stylish solution - cork wall decoration
-
What are the disadvantages of expanded clay as a heater
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
