How to save on plumbing when installing faucets

Any homeowner is interested in saving their money on the purchase and installation of plumbing. This matter must be approached with extreme caution, because you can lose money on the purchase of a low-quality mixer.

Before buying plumbing, think about which device you need. Plumbing publications are intended for daily use, so it should have the following qualities:

1) strength;

2) reliability;

3) convenience;

4) ease of use;

5) durability.

Of course, to save on the purchase of plumbing is very difficult, but possible. Many foreign and Russian companies produce high-quality and reliable plumbing products that have high performance characteristics. However, beware of fakes.

To save money on the purchase of plumbing products, try to order them from a warehouse or online store. As practice shows, the cost of products there is much lower than in a regular store. Another tip - buy plumbing from domestic manufacturers, because they are exempt from customs duties, which means cheaper.

Today, water saving is very popular. To protect water resources, a highly efficient plumbing was created. Water-saving technologies have reached conventional faucets. The use of such devices will make life easier and save a decent amount of money to pay for water. A few years ago, it was necessary to spend not only our time on the adjustment of warm water, but also a sufficient amount of water that was wasted. Modern single-grip mixers have reduced the time to set the water temperature and pressure. In traditional single-grip mixers there were two water regulators that needed to be constantly turned, and modern designs are controlled with a single lever. In addition, the next time you turn on the water, you will not need to re-adjust the water, the temperature settings will remain if you do not turn the lever in different directions, when you turn off the water.

It is proved that when using modern single-grip mixers, water savings amount to 17 cubic meters of water per year. Install faucets in the bathtub equipped with an aerated jet, which becomes more voluminous due to saturated air flow. This common water supply technology will significantly reduce water costs.