How to check the building level for accuracy with a simple method

In the construction process, the construction level is often used and it is imperative that it show accurate results. Otherwise, it is difficult to perform a number of necessary works, and what can we say about professional craftsmen who every day are faced with the need to use.

What should I focus on?

In the selection process, it is important to study the body of the product, it is best that the walls are thick at least 2 millimeters, and it is better that it is cast. If the ends have additional inserts, it is difficult to determine the wall thickness. It is also extremely important when choosing to pay attention to the products of a trusted manufacturer, in which case the risk of acquiring low-quality goods is minimal.

A flask is also an important element, it is best that the bubble inside is large, and between the risks the distance should be 1 millimeter. In this case, measurements can be made with great accuracy. Cheap models do not have this. It is also worth knowing that in most cases the manufacturer uses ethanol as a filler, the thing is that at freezing temperatures it does not freeze, so you can use the level at any time of the year.

It is also best to have at least two flasks per level, horizontal and vertical, an angle of 45 degrees, even professional builders are not required.

How to check accuracy?

Of course, if the tool is required for rare use, then you do not need to acquire an expensive level, you should pay attention to more affordable models. But when buying, you need to know how quickly and easily check accuracy.

Horizontal

It is important to remember two basic rules:

1. Even a new level may be inaccurate.
2. Even an expensive and high-quality tool can lie.

In order to perform the check, you need to find a relatively flat surface to which the tool will fit snugly. It is important that the plane is not deformed. Having applied the level, you need to make marks on both edges, then remove the device, turn it over and attach it to the same place again. If the indications are the same, then it is worth boldly to acquire a tool.

If there is no even plane, then you can use a match, for this you need to put the building level on any plane, not necessarily even and put a match on one side of the level. After that, you need to move the level until the bubble comes close to the risk. Having made a mark with a pencil, you need to turn the level over and attach it again. A similar result suggests that the tool is accurate.