How to hang hanging furniture reliably

The hinged furniture really should be reliably fixed for the further successful operation. Moreover, hanging cabinets or cabinets are under additional stress due to the things that are placed in them.

Linkage mechanisms

There are many reliable and modern fittings for furniture hanging on the construction market, so there are plenty to choose from. For fastening hanging furniture special rails and hinges are used. The last fittings are fasteners with a hook that hooks the cabinet from the inside.

Mounting plate

It is very convenient to use the mounting plate for hanging, since when marking the height and other parameters no outside assistance is required, while the furniture can be hung evenly and according to the marks. The design of the plank provides for adjusting screws, with which the furniture can be made higher or lower, pushed and brought closer. Moreover, the design does not lose in reliability and strength.

Special notches are made on the tire for hitching, with the help of which it is possible to adjust its length. Also, the mounting plate can be installed even when the tile apron is ready. Dismantling is as easy as mounting. In general, the time for hitching takes no more than 1.5 hours.

The disadvantages include the high cost and the formation of a gap between the furniture and the wall, associated with a loose fit due to the design features.

Furniture hinges

The most common way to fix furniture is furniture hinges. They are more affordable, but installation requires more time and help.

First, the upper boundary of the cabinets is drawn for the total length. After the accuracy and evenness of the line is checked by the building level. On the workpiece, the first point under the loop is marked, and a hole in the wall is made with a drill or perforator. Then a cabinet or cabinet is taken and hung on a loop to determine the location of the second fastener with accuracy. The flatness of the installation of furniture is checked by level.

The whole process of work requires an assistant who will hold the cabinet or check the evenness of the linkage. If the cabinets go flush against the wall, then after installing them, the adjacent walls are fastened with screws.

Necessary tools

For high-quality furniture fastening, you will need the following tools: drill, level, tape measure, screwdriver, hammer, clamps, wrench, fasteners.