How to quickly cut thick porcelain tiles

Porcelain tile is made by pressing several materials at once:

• Clay;
• Feldspar;
• Minerals
• Quartz sand.

The compressed mixture is then calcined in an oven. After carrying out these technological operations, a dense structure with virtually no pores is obtained. In addition, porcelain stoneware becomes incredibly durable, reaching an indicator of 8 units on the Mohs scale.

To answer the question - how to quickly cut thick porcelain tiles, you should know the processing methods of such a durable material. The cheapest way is hand cutting, which uses a simple hand tool. Typically, this method of quick processing of thick ceramic granite slabs is used for small volumes of work. The advantages of this method are the following factors: the absence of dust generated during cutting, as well as the use of a simple and cheap tool. Among the shortcomings can be identified very low productivity and poor quality cut. It has chips, its edges have a wavy shape.

If you use a power tool when cutting thick porcelain stoneware, then the work will be significantly accelerated. This method is suitable when you need to quickly cut a huge amount of building material. This method of processing porcelain tiles has several advantages:

1. High cutting speed.
2. Very high quality and even cut.

Disadvantages:

1. During cutting, a large amount of dust is generated.
2. In the process, a loud and unpleasant sound is made.

In order to avoid damage to the material during processing of porcelain stoneware plates, cutting should be started from the front of the building material. When cutting with a grinder, it is necessary to slow down the movement of the abrasive disk at the beginning and end of processing of porcelain tiles.

Porcelain tile can be cut using an electric tile cutter. Such a tool is ideal for this type of work. However, keep in mind that this is not easy. It is necessary to prepare for the process, having trained on unnecessary or spare plates.

A manual tile cutter for cutting porcelain tiles is not suitable, unless you use such a tool to process thin floor tiles. For cutting thick plates, manual tile cutter is sometimes used to indicate the place of cut.