Tabletop - a plate acting as a table, mounted on a solid frame. The thickness of the countertops largely depends on the material of manufacture and can vary within wide limits. The width of such a product depends on the depth of the furniture. Kitchen worktops are subjected to severe stresses during operation. They beat and cut products, perform a variety of operations. The surface should be as resistant to damage as possible. Changes in temperature and humidity should not be harmful.
One of the popular materials for creating countertops is stone. Main options: artificial stone, marble and granite. The shape of the products can be very different.
Granite is a wear resistant and fairly hard natural stone. It will not work to scratch such a countertop. Temperature differences and water will not violate the appearance of granite countertops. But at the same time, any breakaway from it will necessitate a complete replacement of the product, since repair will be impossible. It is for this reason that they usually refuse to buy granite countertops. In addition, it is necessary to use a cutting board during cutting products, as the knives become dull when interacting with granite very quickly.
Marble is an exquisite stone with a noble appearance. The main problem in its use is the need to follow the tone set by the marble. Such countertops will not look in combination with plastic. It can only be supplemented with natural materials and glass. In addition, aggressive substances can harm the stone. Care must be taken of him carefully. Stains on the surface can remain both from hot dishes, and from spilled liquids. Only by special means is it sometimes possible to remove contaminants from this porous material.
Artificial stone makes budgetary analogs to countertops made of natural materials. There are two options here: acrylic stone or agglomerate. In the first case, we are talking about a material in which acrylic resin retains mineral constituents. It looks like natural stone only visually. Care for such a tabletop is not particularly difficult, since it is very resistant to damage and pollution.
Agglomerate, which is also used to create countertops, natural stone also repeats. This is a polymeric material having high strength. But at the same time, it will not be possible to restore or repair such a countertop after its damage.
-
Why it is not recommended to build a hollow brick house
-
Why is it important to know the weight of the brick before construction
-
Than cellular polycarbonate is better than monolithic
-
What type of corrugated board is the most common for roofing
-
Where a cheap substandard corrugated board is useful in construction
-
Typical errors in the installation of wall panels from corrugated board
-
Embossed tile: what is worth knowing before purchase?
-
Popular materials for construction
-
What is the advantage of building houses from wood concrete slabs
-
Facing tile: types and characteristics
-
Gutter systems: types, materials, characteristics
-
Why you should not use expanded clay as a heater
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
