How to choose a steel bath

Sooner or later, many apartment owners start looking for a new bathroom. This occurs for various reasons, but most often it is mechanical damage. Acrylic bowls are gradually replacing steel bowls; such products are in great demand among consumers. There are a number of reasons for this. First of all, you should understand the pros and cons of such a bath, as well as its differences from others.

From the pros, you can distinguish:

• The price of a steel bath is often cheaper than the price of cast iron or acrylic. Despite this fact, the quality of steel is not inferior to any of the above materials.
• This material is quite easy to clean. You can use any kind of detergent without fear of damaging the bowl.
• It is worth noting and thermal stability. The steel bath perfectly withstands sudden changes in temperature.
• An undoubted advantage can be considered the high durability of the product, as well as the long years of operation, which can be extended with just one minimal maintenance of the bowl. Enamel coating is a great plus. In its composition, it easily defeats acrylic.

Of the minuses:

• Low noise isolation. When water gets on the surface, a distinctive sound is created that spreads throughout the apartment.
• Still worth noting is the fact that water cools in a steel bath much faster than in others.

When choosing, you should pay attention to the wall thickness in the bowl. Steel should be no less than 3 mm. Due to this size, the walls will not deform with a large amount of water. If the thickness is less, then enamels tend to crack under stress, and it will be impossible to fix cracks.

View product weight. This is very important, because the length of full-sized specimens should be close to 2 meters and a width of 80 cm. At the same time, it should weigh about 40 kilograms. There are also small bowls, they are also called miniature. Most often, the weight is 20 kilograms.

Pay attention to various coating defects. There are many cases where the surface of a steel bath has been damaged due to the nature of the material itself. Therefore, carefully inspect the enamel!

Weigh the pros and cons during the selection. If you still decide to buy yourself a steel bath, carefully inspect it before buying for defects. Be sure to consider the thickness, because if the walls are too thin, the shape of the bowl may deform over time.