1 The practice of using bath cleaners
- 1.1 Baking soda
- 1.2 Soda-based ammonia
- 1.3 Vinegar with soda
The problem of quality bath cleaning affects many apartment owners. Yellowness, dirty blackened raids, how to get rid of them? Is it possible to clean the bath using inexpensive cleaning products? If possible, which remedies are better?
Advertised means, overgrown with promises of cleanliness even where they are unable to cope with dirt. Advertising is done primarily for the mass sale of goods from the manufacturer, the buyer’s requests, if they are taken into account, then in the second place. And what happens in practice?
The practice of using bath cleaners
Practice has shown that there are no perfect cleaners. Products with a strong cleaning effect can, together with stains of stubborn dirt, clean the protective coating of the tank to metal. Weaker, will not give a tangible result. It all depends on the degree and duration of pollution.
A new bath should be washed regularly, at least once a week, but better after each use. Then there will be no spots. It will be difficult to clean the old one, with stubborn stains, but it’s worth a try. To do this, it is better and cheaper to use folk remedies.
It perfectly copes with a lot of pollution, does not emit sharp unpleasant odors, there are no chemical compounds hazardous to humans.
Recipe: Wet the entire surface with water. Pour soda into the tank to be cleaned and rub it with a brush or sponge over its entire surface. Leave on for 50-60 minutes. After, just rinse with water, rubbing with a sponge. This method is great for cleaning your bath regularly.
Helps to remove impurities that begin to eat into the protective coating. Well cleans traces of water from rusty pipes.
Recipe: Pour baking soda into a mug (about half a pack), add ammonia. Stirring the composition, add ammonia until a viscous liquid mass is obtained. Apply to the surface to be cleaned and leave to soak for 30-40 minutes. Then, wash off the mixture with water, rubbing with a brush.
Vinegar with soda
Eliminates old dark spots, cleans away rusty stubborn spots, kills all microorganisms that pose a threat to the human body. It has an aggressive effect on the protective coating layer of the bathtub.
Wet the surface with water, smear soda over the entire surface of the tank. Pour vinegar into a pre-made plastic bottle with a spray bottle. And sprinkle it abundantly over the entire surface to be cleaned with grated soda., Leave for 30 minutes. We wash everything off with hot water. Rinse with a sponge with warm water.
- Why you should not do dry cutting tiles
- Why it is undesirable to fill piles with grillage
- What techniques will simplify the installation of polycarbonate in the connecting profile
- How to wash the surface of the material from the foam easily and quickly
- Without which tool it will not work to make a hole in polycarbonate
- How to arrange the supply ventilation
- What is the best waterproofing of a bathroom under a tile?
- How to quickly make repairs in the apartment with your own hands
- What tools can you do without removing bitumen?
- How to cut floor tiles diagonally
- How to cut a corner in a tile with a tile cutter
- How to mask nails on platbands
New publications are published daily on our channel in Yandex. ZenGo to Yandex. Zen