Creative crafts from plastic bottles

Many things can be made from plastic bottles - from simple toys to a child to a real home. Moreover, not a single dozen such containers of different volumes can be assembled at each house. What interesting can you come up with?

Ottoman from bottles

For crafts, you will need several dozen bottles, yarn, knitting needles, cardboard, foam rubber, scissors, a sewing machine.

To begin with, all the bottles closed with lids are collected in a circle. The amount is selected depending on the desired size of the ottoman. Then they are firmly wrapped with tape. Two circles are cut out of the cardboard, covering the area of ​​the bottles, and glued to the base.

Further, blanks cut from the foam: two circles and two rectangles. They use soft tape to upholstery. It remains only to sew or tie any desired cover on the ottoman.

Cat or dog feeder

For a home feeder you will need two large plastic bottles, scissors and food. A slightly larger slot is made in the middle of one bottle than the neck of another bottle. In it, a slot is made under the feeding trough. The second bottle is cut in half, its upper part is filled with feed and the cap is unscrewed. The lower part covers the upper.

Vase for sweets

For a candy store you will need round hard plastic or a plate, six two-liter plastic bottles, a plastic hard tube or a wooden rod, as well as superglue and paint.

In round plastic, it is necessary to make a hole of about 10 mm with a drill and a drill, similar actions should be carried out with three plastic parts from the bottles. The latter is better to drill from the inside out.

Next, three blanks are mounted on the rod using superglue, and the rest are attached to the base. After all the details are painted with spray paint.

Plastic Bottle Broom

For this craft, you will need three two-liter plastic bottles. From the first, it is necessary to cut off the lower part, then with scissors the base is cut into small strips to the neck. All the same must be done with the two remaining bottles, only their necks are cut off.

Bottles without a neck fit on the first - this is a blank for a broom. One cut off top of a plastic bottle is worn over it. Through all layers two holes are made into which the wire is inserted and the ends are wound. A stick is threaded through both necks and is nailed to the workpiece.