When making this or that repair, it is necessary to be guided by various rules and instructions, which contain detailed information about the upcoming work. We need to clearly plan our actions that will help to achieve the desired result. The same requirements apply to wall primers. As a rule, this procedure requires a person to pay increased attention to various trifles. This article will discuss the rules for priming walls, the implementation of which will help to avoid stains and bubbles on the wall.
Why do I need a primer
Many people skip the stage of priming the walls. However, this is not worth doing. Primer, a substance that will never cause mold on the wall. It is also able to enhance the bonding of surfaces. Some experts in the field of construction recommend applying several coats of primer. In their opinion, this will only improve the efficiency of the work.
The main purpose of the primer is to make the surface as flat as possible, onto which subsequently without any problems it will be possible to glue the finishing material. With its help it is possible to remove even the smallest roughness.
If the walls are not primed, then some time after wallpapering, various spots and bubbles can form on them. However, the implementation of this stage does not give an absolute guarantee that these effects will not appear. The main thing in this matter is to properly perform the priming process. This will be discussed further.
How to primer walls
To perform this procedure correctly, you will need several tools:
1) Roller.
2) Brushes having different widths.
3) The container into which the solution will be poured.
4) Work gloves.
5) Thermal gun.
6) A few rags.
Also, before starting priming, it is necessary to remove visible irregularities, defects from the surface of the wall.
Note! Before applying a new coat of primer, you need to wait a few minutes. This time will be enough for the old layer to dry. Ignoring this requirement will directly affect the quality of all work.
The technology for priming is quite simple. The main thing is to brush all hard-to-reach spots with brushes. On the old putty they can be quite a lot. The main sections of the wall are primed using a roller.
Fulfillment of these requirements with a high probability will help to avoid the appearance of spots and bubbles subsequently.
-
Where is it better to grow flowers in the apartment
-
Why very often experienced people use polystyrene for insulation
-
What you need to consider in the kitchen in Khrushchev
-
Ways of wall shredding for wiring
-
The worst water supply options for a country house
-
Bedroom Wall Ideas
-
Red color in the interior: distinctive features and characteristics
-
What wallpaper glue is better to choose?
-
5 significant shortcomings of shingle roofing
-
How to choose tile adhesive?
-
Which heating boilers are compact, but not inferior in power
-
Creative decor and crafts from pasta
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
