How to cut floor tiles: how to cut floor tiles

Tile is one of the most popular floor coverings that are used in modern apartments. She has a lot of advantages that make her so attractive to customers. The installation process is very simple, therefore, it is quite possible to cope with the work independently without the involvement of specialists. It is in this case that some owners have a question about how to cut floor tiles. What tools may be needed in this case and what will be better? You will learn about everything in this article.

How to cut floor tiles

There are many options for cutting floor tiles. This can be a drill, and a grinder, as well as other tools. Let us consider each method in more detail and determine its features. So you can choose for yourself more suitable.

Glass cutter and office knife

When choosing this method, you should act very carefully and carefully. One wrong move can not only ruin the coating, but also harm you.

It is convenient to cut even the most dense tile with a glass cutter. To do this, you first need to make special notes, then put the tile on a flat surface and start cutting with a ruler. If everything was done correctly, then the product will break perfectly evenly.

Thinner models can be cut with the help of an office knife. This usually takes a little longer due to the fact that it will be necessary to carry out an incision several times.

Tile Cutter

If you have tile cutting tongs at home, the process is greatly facilitated. But for this you need a ruler with a right angle.

• First of all, of course, put tags.
• After this, you can begin work - you must first make a not too deep incision to form a certain groove, and then press the forceps.
• After that, the tile will break in the right part.

Drill

Sometimes you have to cut the tile is not easy in a straight line, but also in a more complex way. This is often required by the configuration of the room - for example, it is necessary to bypass pipes or other objects.

In this case, a drill will help, but it will need special nozzles. It could be:

• tubular drill;
• "Ballerina";
• ordinary drill;
• "crown".

Please note that the drill will have to be periodically moistened in water, and you must first destroy the enamel before starting work.

Jigsaw

Another option might be to use a jigsaw. It is best to take a model with an electric type diamond wire. Place the tile by weight, for example, on a chair or other furniture.

This method can achieve an extremely even cut, so this method is very common. You just need to be careful and make the correct markup in advance.

Bulgarian

For those who know how to use a grinder, it is possible to cut immediately a large amount of coating in a fairly quick way.

IMPORTANT. Do not try to cut tiles with a grinder if you have never used this tool before. An important point here is personal safety, because there is a risk of significant harm to yourself in the absence of special skills.

Before you start slicing in any of the above ways, be sure to practice. This will allow you to achieve a perfectly smooth tile, which subsequently perfectly lies on the floor.