The height of the bench: the required size for a comfortable bench seat, how many seats is designed bench, standard design sizes

This design, as the bench is considered the most convenient and affordable. It can be purchased at a low price or without the various difficulties make their own. However, as in the first and in the second case it is necessary to know the ideal parameters that it can provide you with comfort. In the villageAnna article's understand what the basic principles are helping to set standards and how to take them into account in the design.

The required size for a comfortable bench seat

Let's start with the determination of depth. In this aspect, it is important to provide a small clearance, which will be formed from the distance between the edge of the bench and part of the legs of a man sitting on it. It is recommended to adhere to standards equal to about 400 millimeters (+ -25). To achieve the ideal width should preferably be guided by their preferences. However, the most commonly used size of 410-510 mm. In addition, you can use your imagination and make, for example, narrowing toward the rear side. This will allow users to freely arrange not only the legs, but also elbows. If in the application of existing furniture pillow - it is possible to construct buildings a slight slope. Its value must be between 5 and 8 degrees.

The height of the bench

As for the said parameter, as is the relationship between its finding and comfortable seating condition of people. To begin, consider the second point: for a winning pose requires that human knees are at an angle of 90 to 100 degrees. And his feet shall be in abutment to the surface. To do this, the store should be placed so that the distance from the floor to the product was about 405-455 millimeters. If the facility is used with packing material, such as a pillow, you should consider the added convenience. In such a situation, to determine the height, you need to pay attention to the thickness, namely - in compressed form. This indicator should be subtracted from the total of the hill.

How many seats designed bench

Of course, on the amount of product directly affects the length. This factor may be extensible from 0.6 to 3 meters. Consider every option:

ATTENTION! It is worth paying attention to the fact that there are people depending on the configuration. The examples also taken into account the average type.

• Minimum rate -. 0.6 m As is clear, this variation is designed for one person.
• 1.2 m. The set is equipped with two supports on the sides. It fit two people in a compact position.
• Length of performance in half a meter up close and similar to the preceding paragraph. But there is one difference consisting in the fact that people here are placed with a small scale. That is, it stays an additional place.
• 1.8 m. There is also support in the amount of two. But it is designed for three people. Such structures are commonly used in public places. In addition, more and more popularity gains among users of summer cottages.
• The magnitude of two meters is referred to as free allocation three persons with an average physique. At the same time remains a space for hand luggage or a child. If we consider the personalities of the small configuration, it can be placed in the number of four. Unlike earlier, this is not only equipped with lateral supports, but also one of the central. For those who do not want her presence, it is possible to buy and its absence. However, in this case, will have to do without the armrests.
• 2.5 m Number of seats -. 4. Widely used in public places, where the permeability is higher than normal.
• It is the maximum option - three meters. As with the above paragraph, it is used in areas with a large number of people, usually it is popular in parks and squares in the city center. But in this case the calculation enables accommodation for 5 sitting.

Standard design sizes

Finally, we denote the optimal size, which are in great demand among the various manufacturers.

• The value of the total height of the entire structure is recommended denote the interval from the base half meters.
• The width should be determined more than 0.5 m.
• As for the back, so this figure is 0.45 m.
• To ensure a perfect angle is best to adhere to 45 degrees.
• Armrests desirable to observe from the seating surface a distance of 20 centimeters.
• Legs. If you decide to bury the product in the ground, the fact is taken into account, as this affects the size of the feet. In such a case will add about 70 cm to result in a bench not get too low.