Removing the door wardrobe: how to disassemble the wardrobe, how to remove the door from the closet with their hands, how to remove the sliding doors at the wardrobe

Wardrobe - a practical piece of furniture has a distinct advantage over fellow swing. It gives an opportunity to save space, easy to use, has a lot of finishing variations, however, the cost of manufacturing low is difficult to call. This is due to the high cost of sliding mechanisms, a significant amount of time and effort to build and further installation. Costs expect the owner in the case of failure of any element - to disassemble the furniture is much more difficult than to collect. Removing the cabinet door coupe for them to remain intact? All works well, you can do yourself, especially if in this case, use the services of master ashamed or want to save a little. Remove the sliding door of a closetand his hands are not sampleslema.

The mechanism of the door-compartment cabinet

Venturing on such a risky event, it is necessary to examine the mechanism, primarily - a strong attitude and motivation are not enough. door installation guidelines in the closet only two:

• Cheap and not very popular, besides the quality is questionable. Doors are mounted hinged manner and the motion is on the top rail.
• Reliable and widespread, as well as more expensive. Movement lower door rail is provided, which receives the large load, and the upper performs the guiding function.

REFERENCE. The first type of mechanism equipped with small cabinets, the doors that do not have a significant weight. The second - high-quality and reliable products, since in this case the leaf is firmly fixed and malfunctions almost impossible.

Parse wardrobe

Manufacturers are trying to simplify the process of assembly and disassembly of furniture, so you'll need for a screwdriver and an assistant. In addition, it is recommended to prepare the container for directly storing screws and other small parts, and also record the sequence of actions. Before removing the need to get all of the things to take out the drawers and shelves. The same applies to glass elements, mirrors.

remove the door

The process requires care and accuracy, especially if the flaps are not removable mirror surface. Careless movement or haste could lead to its damage, and thus the additional spending. Procedure:

1. You should start with the first door you want to slightly raise and lower pry screwdriver rollers.
2. Next door is slightly pulled over, and the lower part of it is out of the bottom rail. Excessive force here contraindicated, otherwise the upper guide can be deformed.
3. Finally, lower the door down at a slight angle - while it is easy to come to the top of the rail.

The second door is removed in the same sequence. With the aide things go much faster, besides the probability of damage anything will be much lower. If the closet is equipped with hinged doors, the procedure of removing a little bit different. You will need a wrench, which weakens the clamping bolts. Followed by slightly pull the flap over and carefully remove it from the slot. More expensive enclosures can be equipped with additional equipment such as door closers, clamps, additional frame. In the case of door closers and locking should start is with them, and in the construction of a frame need to take it off the retaining parts, which will roll out the door easily.

Dismantle the shelves of the cabinet

Furniture shelves are arranged horizontally and are intended for storage, while their attachment occurs various accessories:

• eccentric removed with a Phillips screwdriver, and are arranged under the shelves that are removed upwards;
• European standard screws require the presence of an Allen key, which is first unscrewed the end attachment, and then the side;
• in fixing shelves Allen, you need to remove the cover of plastic elements, and then unscrew the screws.

NOTE. Most often small size fasteners have to be as inconspicuous as possible in the design, so you should put them gently, so as not to lose.

Remove the septum and posterior wall

In conclusion it is necessary to remove the partition, guided by the same principle as with the shelves. Difficulties with them should arise, which is not true of the rear wall, which is sometimes fastened tricky way:

• if the wall is attached to the whole, which is only possible (base ends of the shelves), it is necessary to remove all the fasteners, which could be many;
• in the case of fixing the lid and the side walls of the furniture, the wall will withdraw only when the frame is dismantled.

To avoid the problems associated with the return of the cabinet in the original form, well capture a sequence of actions or instructions to use, which often comes in the kit.

Features of the process and expert advice

Any difficulties during disassembly wardrobe should not occur if all actions are performed carefully and slowly. As for tips from the masters, then, first of all, they recommend to determine what materials are made pieces of furniture. For example, if the rear wall is made of MDF, then you should make an effort not to damage it, or to remove in the first place, if possible. Material not differ in strength and there may appear a dent or cracks. If closet attached to the wall, then you must first disconnect it, otherwise access to the rear wall will not. In furniture, consisting of several parts, each element is parsed by one, and if it is equipped with a mezzanine, then it must first be removed. The key to success is simple, as is the case with any furniture - all actions must be performed carefully and in strict sequence. The only way you will be able to make out the case, nothing will not be damaged, and then reassemble it without any problems.