Carbon Water Filter - Purifier? Action, the main purpose of

Coal water filterThis device is necessary for respecting each person. As for the appearance, so it is a plastic surface, which is designed for mineral water, and he activated coconut charcoal. These are the two most important components of the unit. The very same body is equipped inside with a special system, which includes a pipe distributor, and a valve that regulates the frequency and duration of the wash. In addition, the control unit can provide basic performance modes: filtration, reverse (where the liquid falls into purified) and flushing line (sent to the sewer line). Many wonder - charcoal water filter that purifies? We find the answer to it.

The action of the carbon filter - as he clears

The content of the article

  • The action of the carbon filter - as he clears
  • The main purpose of the charcoal filter

Principle of operation it is quite simple and effective: it is filled with activated carbon. It is precisely because such a load has a sorption capacity.

Water passes from the top to the bottom therethrough. Meanwhile, there is a liquid purification of various contaminants. This process is also characterized by the depletion of the tank, which is coal.

instagram viewer
For optimal process it is desirable to observe the humidity in the room - not higher 70%.

ATTENTION. Operability is periodic. This means that the whole cycle should be carried out with a certain time interval, with the best at night. Namely - from one to two hours several times a week.

In most cases, such a structure is set at the last level of water purification. However, the user can use it as a separate filter from all, or in conjunction with them.

REFERENCE! Cylinders can be used in pairs, which significantly improve the process of purification.

Coal water filter

The main purpose of the charcoal filter

The main purpose is to maximize and efficiently eliminate the impurities from the water stream. These may include:

  1. Composition carbon filter for waterNot the desired taste and smell.
  2. Organics and organic compounds, microorganisms.
  3. Suspension and / or algae, non-specific color.
  4. Excess active chlorine.
  5. Iron, various types of deposits, rust.
  6. Disinfectant compositions.
  7. Bleach.
  8. Turbidity.

However, it is important to remember that the variety of salts and bacteria device is no way to eliminate. This is done by means of other additional devices. And if they are used, it is possible to avoid particles that are likely to peel off. Apply them as yet another stage of the process.

Besides the above, the technology is not intended for the hot water supply system and about all kinds of heater, as a high probability of losing the necessary qualities and properties adaptations.

Smart water filter: what can do, how to use, cost

Smart water filter: what can do, how to use, costFilters For Water

Everyone perfectly understands that the quality of tap water always leaves much to be desired, because it contains a large amount of impurities that adversely affect our body. That is why it is ne...

Read More
Coarse water filter installation: basic types of devices, installation rules

Coarse water filter installation: basic types of devices, installation rulesFilters For Water

Water before entering residential buildings always passes through a whole system of filters of urban treatment facilities. But, despite this, many chemical particles larger than 10 microns in size...

Read More
Filter device for water purification: materials for cartridges, installation rules

Filter device for water purification: materials for cartridges, installation rulesFilters For Water

In order to get high-quality water without harmful impurities, consumers need to purchase a modern filtration system. And that is why today we decided to talk about the device of similar equipment...

Read More