If the ceiling curves boards installed, you can try to fix this situation. Improper docking of similar elements is largely due to the fact that over time, such a surface will be exposed to more and more curvature.
Before to rebuild the base of the ceiling, you should pick up these materials and tools:
- capacity calculated at 20 liters, which is mixed for the desired finishing solution;
- a diverse set of spatula, trowel, grout sponge and a principle of action;
- punch, the use of which will occur batch material to eliminate inconsistencies between the seam ceiling tiles;
- brush, roller and tray;
- dirt solution "concrete-contact".
To the result to eliminate irregularities on the ceiling slabs gave the desired effect, the primer should be subjected not only to concrete but also each individual layer of plaster applied here. At the same time all the moisture out of the solution perfectly absorbed concrete, and this may eventually lead to the fact that the plaster will fall away. And in order to avoid such negative consequences, treated with a base should definitely qualitatively primed.
The geometry of the tiles plays a decisive role in this process. And for it to be applied evenly to the ceiling, with the purchase of a finishing material should pay attention to the corners of each plate. They should be straight and somewhat sharp.
The density of the boards in their installation is also very important, because through it the installation of such an element in the solution to produce a lot easier. Accordingly, the process of alignment of tiles will be carried out at lower resource and physical costs.
It should also pay attention to the relief of the primary image to avoid foreseeable dents on the tiles and the possible sag. It looks unsightly, if seen on the surface of polystyrene beads.
Alignment of tile is best to start from the center to the point at which the hanging chandelier. It is desirable to accurately get around in a circle and not to damage the existing light fixture system.
To some extent correct uneven roof surface on which the plates are installed, it can also be varied by arrangement suspended or boarding designs. Excellent camouflage flaws made when laying tiles, massive decorative elements that will be an additional decoration of the interior rooms conditional.
