What can securely fasten siding

A small detail can change the quality of attachment of the assembly. It is therefore necessary to pay due attention to the correct installation saydingovyh fasteners. Even with a good selection of material for siding, when installing the ideal lathing and correctly calculate a cut panel, can spoil the whole result of improper means of fasteners.

Therefore, in order to avoid unpleasant situations you need to get serious about the choice of the method of fixing the siding. What methods are more suitable for certain materials and why. What is fixing the panels it is considered the most practical.

fastenings

Professionals suited to the choice of fasteners individually to each case. No universal methods.

The most frequently used types of fasteners:

• nails;
• Screws with a hemispherical head;
• Screws with a drill and without it;
• Universal screws;
• staples;
• Dowel Screw of polyethylene.

When choosing not usually guided by the cost of purchase, and have experience of using those or other details, as well as the availability of the necessary tools.

Important! When choosing a fixture should pay attention to the type of siding that is currently in use. This can be a vinyl or metal. Furring material is of great importance.

Nail

Nails in such cases used two types - Aluminum and zinc plating. It must be flattened head and the pointed end. Of the tools you may need a hammer and nail puller at work with a nail (if the structure is fixed properly). The use of nails as fasteners for siding involves manual labor.

After hammering nails should pay attention to the distance between the cap and the surface (no more and no less than 1 mm). In the case of deep driving must use a claw hammer and repeat.

Universal screws

Most often, professionals use them for fastening cardboard-gypsum parts.

When buying screws need to pay attention to the type of thread:

• Meklaya thread is for good fixation of metal parts;
• Coarse thread is necessary for the creation of structures with wooden details.

Thanks to the self-tapping screws produced reliable and durable construction. In which case you can make an easy disassembly.

Screws and hemispherical head

Such cylinders are designed to samonarezaniya and narrowing holes. There is a thin thread which passes easily between the screw head and the point of closure.