How easy to find the most prominent points on the wall

In the process of repair of the premises, many owners pay special attention to alignment and surface preparation, and rightly so. If the surface is a strongly exposed point, it affects the complexity of the repairs. So it is extremely important to remove all lumps and bumps, but it's better to do it in advance.

At that unevenness may affect?

If the surface has protruding place, they may lead to some negative points:

  1. Wallpaper pasting process complicated, due to the fact that on an uneven surface coupling will be worse. Accordingly, the wallpaper can delaminate over time.
  2. To align the need to use more plaster.
  3. Time spent on it to carry out all complex of works.

And even after the repairs, if you do not find a bulge, it can lead to negative consequences. So it is better to get rid of them, so as not to run into problems in the future.

How to find irregularities on the wall?

Helicopter - this is one of the most common ways to identify irregularities. The method consists in that using perfectly flat bars hold over the entire surface, and determine the degree of flatness. If the bulge there, it will be immediately visible.

instagram viewer

If the problem areas identified, it is necessary to bring down, and then again to spend on bar surface. It is best for one area of ​​the passage several times to identify absolutely all the problem areas.

Sometimes you can use instead of the bar, even an ordinary building, it must be possible to attach tightly to the wall. Again, any difference will be visible clearly.

Of course, we can try to determine the bulge even with normal range, but it will be very problematic.

If on the surface there is a large influx, which is located in different directions by at least 10 centimeters, it is not necessary to shoot down. But do not be amiss to leave a pencil mark to know the problem areas.

Of course, if there is no tool and knowledge, it is best to refer to the master, which can not only identify the problem but to solve it as soon as possible and without any costs. This is important, because the smooth surface - is the quality of work performed in the future. That is a guarantee that in the future will be no problems and everything will be done with maximum quality.

Is it realistic to cut glass with a grinder

Is it realistic to cut glass with a grinderWith Your Own Hands

Glass is transparent, strong, but at the same time relatively fragile material. Glass differs in that it tolerates the effects of almost any temperature, including very high. Most often, special t...

Read More
Do-it-yourself restoration of old chairs

Do-it-yourself restoration of old chairsWith Your Own Hands

Often, when outwardly the chair ceases to satisfy its owner, it is thrown out. This usually happens due to a shabby seat or a little crumpled legs. However, almost any thing can be restored, there...

Read More
Wood carving with a jigsaw - basic techniques

Wood carving with a jigsaw - basic techniquesWith Your Own Hands

Wood carving is a fascinating activity with which you can create stylish and fashionable products. You can use not only plywood, but also an array. Certain knowledge and experience, of course, wil...

Read More