Selection of the tap in the bathroom at first glance may seem like an easy task. However, not everything is as simple as it seems. Having come into the store and ask the salesperson Council will have to answer a series of questions about its shell, to which you have decided to choose the "couple" as a mixer.
General rules for the selection of the screen size to the sink
The content of the article
- General rules for the selection of the screen size to the sink
- The height and length of the spout
- The form and method of installation
- Advice
In order to mount the faucet, joyfully exclaim: "How then was", it is necessary to take into account all the features of basin.
Primarily, importance of his depth. To a large funnel-shaped bowl you can use any gander, the flat - only low.
The presence and number of holes for mounting It is also important. If it is one - choose a single-lever mixer or monolithic valve, three - built dvuhventilny (visually they "grow" out of the rim separately). In the absence of holes have to look for a suitable specimen among the models, fixed to the wall.
Attention! In the case of wall mounting is necessary to provide proper liner pipes for hot and cold water.
And finally, we must not forget an aesthetic component. Rectangular sink suitable "friend" with a similar geometry, and oval or circular - with smooth curves.
Not bad, if they are designed in one style.
The height and length of the spout
According to the "growth" are distinguished:
- low - from 12 to 15 cm;
- medium - from 15 to 20 cm;
- high - more than 25 cm.
Most often installed in the sink taps with the first and second type of spout.
By distance from the base to the tip of the goose found:
- long - suitable for a wide sink;
- short nose will have "to the court" and wide, and a miniature model.
The form and method of installation
The most common commercially available mixers can be seen in traditional shapes. Straight typical for the short and long spout Washbasin bath. curved Configuration is more commonly used in the kitchen models.
Relatively recently appeared on the market plumbing valves, resembling a mini-waterfall. Their shape - Cascade: a small plate does not flow stream, and the flat water flow. He looks very impressive and fits perfectly in the modern design solutions.
Mixers can be installed:
- horizontally - on the sink rim or countertop. For this purpose, porcelain and earthenware plumbing manufacturers certain diameter drilled holes. Pipes thus tend to hide in the shell leg or other body structure;
- on a vertical surface. Summing up the water is carried out communications, hidden in the wall.
Advice
Features mixer are entirely dependent on the washing construction. When choosing a sink, carefully consider how you will use it:
- Hand washing, brushing and washing miniature model suitable, respectively, and the crane will be small, short and low spout or cascade type;
- if in addition to hygiene, you are going to wash the head, paws dog or something voluminous, choose a bowl wider and deeper. Mixer, of course, also be higher and longer.
Relate all the parameters of the sink with mixer parameters. When mounted spray or cascade of water should fall to the bottom, but not on the bowl wall, next to or directly into the drain. Swivel aerator allows to change the angle of inclination of the water and reduce the dependence of the parameters of the crane on the shape and depth of the shell.
A good option is simultaneous purchase and sink, and faucetAnd perfect - set a single line from a single source where everything is already aligned and matched up to you.
Both products should be not only in harmony with each other, but also fit into the interior bathrooms.
The presence of sink significantly increases the level of comfort in the bathroom and extends bath life, eliminating it from the daily additional "burden". A suitable mixer eliminate the puddles and splashes on surrounding surfaces and your clothes.
