What should be the height of the bath installation?

click fraud protection

Comfort and safety of the bathroom use provided by current regulations. Installation of equipment produced, given the strict regulations. About that, at what height to set a bath and how to properly adjust, read our material.

Standards and tolerances. requirements SNIP

The content of the article

  • Standards and tolerances. requirements SNIP
  • What can be the height of the bath from the floor?
  • if the height of the type of model depends?
  • How is the height adjustment?

The main conditions to be complied with - the convenience of water treatment and ease of operation.
Important, to people easily placed in a tank, it is easy to bathe in children, could be used for other household purposes. Allowing changes up or down, if someone from the family members established standard creates discomfort.

Reference! The main parameter consists of the bowl depth (average value of 500 mm) and the size of the supports used in the assembly. Construction form has no effect on him.

Building Regulations (SNIP) provides the following:

instagram viewer
  • from the floor surface to a skirting distance of 600 mm (including the feet), industrial plumbing produced under this condition, which will be placed freely in the font and out of it;
  • between the floor covering and the bottom product is observed interval of 150 mm, it is necessary to connect the siphon (not added to the previous figure, and includes in it);
  • if the wall to the font there is a gap, it can not be less than 700-1000 mm (depending on the physical features of the owners) to provide unimpeded access to the swimming;
  • Installation is carried out strictly horizontally, with strict observance of the stability of the system.

Example:

standards

What can be the height of the bath from the floor?

The standard was calculated from the average person's growth, and is a recommendation. It takes into account how high the user may lift a foot without experiencing difficulties. Individual differences may influence the preset value:

  • If the house has a small stature occupants, children, the elderly, the disabled, allowed index decline by an average of 100 mm;
  • in pre-school, school, medical institutions provided for installation of the equipment with the option of 500 mm;
  • tall people, in contrast, with an increased fit instances value (700 mm).

On a note! Before starting work put the tank on legs and climb up into it. Be sure to consider the possibility of an individual with the lowest growth.

Another essential characteristic - the depth of the bowl - affects the ability to install a siphon.
In some cases, the need to increase the distance between the floor and the bottom of the product by 50 mm if there is insufficient for installation work space available. For example, the reservoir depth 500 mm, adding to the figure 150 (the space required siphon), and we obtain the required number - 650.

Important! Bumpers should not be higher than this maximum possible level above the floor.

if the height of the type of model depends?

installation method determines the characteristics of the selection models:

  • with metal legswith a metal frame. Used for steel and acrylic construction protects against deformation. There are suitable quantities standard or fixation on another, the optimum distance;
  • using the catwalk. Constructed of bricks, blocks and others. In this case, an additional step may be required not to exceed the allowable values;
  • on the legs. They are manufactured in one piece or regulated, as a rule, the length of these elements - up to 200 mm.

How is the height adjustment?

There are 3 types of materials used for production of sanitary ware, and each of them brings about changes in the installation process:

  1. height adjustmentProducts made of cast iron. Have legs and differ significantly in weight, require the determination of the correct size before the start of the work, because after they change the position will be difficult. Used rigid support that do not involve adjustments. Raise the above construction is possible, using wooden (or steel) backing. Have a tank at a distance from the wall or in the center of the room.
  2. Steel accessories. They are less massive, often equipped with adjustable feet or brackets. Characterized by instability, need the support of at least one wall. There are exclusive options from the parameter unchanged.
  3. Acrylic model. The easiest option, perfectly placed on the metal frame supplied foot pads are not provided with an adjusting mechanism, but they are easy to replace corrected counterparts. In this case, you can always spend the correction to the desired size.

Important! The greatest convenience create sliding winding support, they can be adjusted according to the rules or at the discretion.

Bath is located so that the person was convenient and easy to use it. This is the main selection criteria and rules allow a change of standards, if they do not provide sufficient comfort and safety. The total value of the height varies between 500-700 mm. Be sure to provide the space for mounting equipment.

How many liters are in the bath? How to count? Examples of calculations with formulas

How many liters are in the bath? How to count? Examples of calculations with formulasBath

In recent years, installation in bathrooms, especially small ones, of compact shower cabins is gaining popularity. However, most people are in no hurry to give up the pleasure of soaking in a bath...

Read More
How much does an acrylic bath weigh? How much weight can she support?

How much does an acrylic bath weigh? How much weight can she support?Bath

Acrylic bathtubs relatively recently appeared on the market and are gaining more and more popularity. About the components used in the manufacture, the weight of the structures and its significanc...

Read More
How much does a cast-iron bath weigh: Soviet-era cast-iron bath weight standard

How much does a cast-iron bath weigh: Soviet-era cast-iron bath weight standardBath

A bathtub made of cast iron is a classic version of plumbing. It was from this material that baths began to be manufactured on an industrial scale. Despite the appearance of other, more modern mat...

Read More
Instagram story viewer