An electric kettle is a convenient device that can be found, perhaps, in every home. However, in order for it to maintain its working capacity as long as possible and serve faithfully, it is necessary to remember our tips for its operation.
The content of the article
- Drain the excess
- Do not boil leftovers
- Clean properly
- Place on a flat surface
- Repair in time
- Don't turn it on twice
- Auto power off is important!
- Follow the spiral
Drain the excess
It is not always possible to encounter a person draining water from an appliance after boiling it and using a part. And this, by the way, is correct. If you are too lazy to do this all the time, then pour out the liquid at least a couple of times every 10 days. This will help prevent limescale build-up and keep the heating element in good condition.
@ medium.com
Do not boil leftovers
Especially for those who strive to boil the last 100 ml of water. Of course, if you are trying to break the kettle, then the strategy is correct.
In all other cases, the water must reach a certain level. As a rule, most models have it. If you have not found one, then make sure that the liquid completely covers the spiral. If you ignore this rule, do not be surprised that your device quickly breaks down.
Clean properly
No abrasive cleaners, no metal scrapers, no harsh chemicals. Forget about these methods right away if you want the kettle to work properly.
The equipment can be cleaned only with gentle means. Vinegar, citric acid, ordinary dish detergent are great - this as for the inner surface. For the outer walls, you can completely dilute the laundry soap and wipe it with a solution of contamination.
It is best to dry clean the plug, cord and stand.
@ ambientedirect.com
Place on a flat surface
If you put the kettle on an uneven surface, it will lead to breakdown, since the liquid level in the container will be unevenly distributed. Immediately forget about boiling water on the bed, knees, pillows, etc. (it also happens!).
Repair in time
For most people, it is quite logical that a broken kettle is strictly forbidden to turn on. However, it also happens that this rule is neglected and the device continues to operate with a broken handle, lid, or auto-shutdown system.
Such irresponsibility can lead not only to a complete breakdown of equipment, but also to burns!
@ homedepot.com
Don't turn it on twice
Very often there are situations when family members turn on the kettle again, not knowing that it has just boiled. This is fundamentally wrong, because overheating of the coil is one of the reasons for the breakdown of the device. At least 3 minutes should pass between boiling. If you constantly start the boiling process, the heating element will quickly become unusable, which will not help repairs.
Auto power off is important!
The peculiarity of the electric kettle is that it cannot be turned off when you want. Usually, water boils after 3 minutes, even if the capacity is full, so it is better to wait for the automatic shutdown. If you neglect this rule, then the controller will not work for a long time and you will have to buy a new device.
@ epicurious.com
Follow the spiral
The heating element is the "heart" of any electric kettle. If you pay attention to it in time, it will help to extend the life of the device for many years. The main thing is to descale it in a timely manner, prevent overheating, and completely fill it with water. Such simple little things will save the device from damage and repair.
@ nymag.com
Subscribe to our Social Networks
