The robot vacuum cleaner does not charge: what can be done

Convenient charging substation of the robot vacuum cleaner allows you to neatly install it in the room and put it on the "base" immediately after use. Thus, the device always has enough power and its efficiency is enough to clean all rooms. But there are problems, as a result of which the device stops charging. Consider this option.

Why is the battery of the robot cleaner not charging?

You bought a new vacuum cleaner or have been using a favorite household appliance for a long time. But suddenly he stopped charging or it is bad to keep the battery charge. It quickly discharges, stops working and does not perform the functions imposed on it.

There may be several reasons. It is important to analyze the process of work and understand at what stage the vacuum cleaner stops working.

Possible problems

The first thing that can happen to the device is battery wear. Lithium batteries, which are usually installed in

robot vacuum cleaner, become unusable in a couple of years. If your device has already worked properly for 2-3 years, you can safely change the battery. Most likely, it's her.

The second option is a rupture or breakage of the connector in the charger. It prevents current from flowing into the device. Accordingly, no charging occurs. Before charging, clean all docking points from dust and dirt so that the docking station works correctly.

The third problem is often a problem with the control board of a household device. In this case, even with a high-quality docking with the station, he does not see it. Charging does not take place, the device becomes useless.

Ways to solve the problem

If the problem is related to battery wear, you just need to buy a new one and insert it inside the robot vacuum cleaner. When you buy a high-quality battery suitable for a particular model, the charging speed will not be affected.

In other cases, preliminary diagnostics at the service center will be required, after which the wizard will say that he needs to be replaced at the moment. If the wires break, it may be allowed to solder them yourself.

However, such a device will be withdrawn from the guarantee in case of unauthorized intervention in the structural parts of the device.

If a problem is found in the control board, you will have to pay to replace it. Only a certified master can install a new one. Otherwise, you will lose the warranty for the purchased item.

Malfunctions in the robot vacuum cleaner are always associated with the failure of certain structural parts or contamination of the compartments. Carefully look after the "assistant", and he will repay you with high-quality cleaning.