How to disassemble a robot vacuum cleaner: what you need to know

Smart gadgets are becoming an integral part of modern life today. These include a robot vacuum cleaner, which helps to clean the premises even when the owners are not in the house. However, such devices also have breakdowns that require assembly and disassembly of the device. It is not always recommended to do this yourself.

Dismantling the robot vacuum cleaner

Disassembly may be required to implement cleaning of a home assistant or for minor repairs, replacement of important elements. Immediately, we note that to remove filters, brush or sensor is not as difficult as it seems at first glance.

Note that it is better to take the devices covered by the warranty to a service center. This will prevent damage to the device and maintain the supplier's warranty obligations.

If the owner of the electronic assistant is confident in his knowledge and abilities, you can try to independently cope with the problems encountered in the operation of the autonomous cleaner.

Problems that require disassembly

In the list of malfunctions, there are many errors that the vacuum cleaner often produces:

• lack of inclusion or any action;
• the device is spinning in one place or does not work correctly;
• does not see base or does not charge;
• does not suck up debris;
• the turbo brush or side accessories stopped working;
• squeaks or makes noise;
• the system notifies about an error;
• the wheels do not spin;
• stopped detecting IR sensors.

Some of these problems result from vacuum cleaner clogging. Disassemble it by carefully removing the dust container, large and side brushes, filters. Then clean everything thoroughly, rinse if necessary. Be sure to wipe all parts and the robot itself with a damp cloth and let it dry well.

Defective filters are recommended to be replaced for correct operation of the device.

How to assemble a robot vacuum cleaner?

Reassemble the device in the reverse order. Be very careful not to confuse the configuration and keep the robot moving normally.

We install cleaned and dried filters, brushes, wheels and a dust collector in accordance with the layout in a particular model. We check the performance and continue to enjoy the autonomous cleaning of the little helper.

When do you need to contact a service center?

If the robot is under warranty, it is better to contact a specialist in any incomprehensible situation. We also contact a certified technician in case the engine or other system devices burned out.

Similarly, you should contact the service when you need to reprogram or reflash the device. It is not recommended to do this yourself, so as not to harm the operation of the robot vacuum cleaner.