How to fix a manual sprayer if it doesn't splatter

Hand sprayers help in maintaining the site. With their help, you can organize watering, spraying of various solutions. Standard Models have a simple design. During operation, problems arise that prevent the sprayer from functioning correctly. It is worth understanding the main reasons why the inventory is not working in order to fix the problem.

The reasons why the hand-held garden sprayer is out of order: does not spray, does not pump

Most often, owners of hand sprayers are faced with the following problems:

1. Leakage. It is quite easy to recognize it. Fluid leaks may occur in the area of ​​the connection valves or hose. It is necessary to stop working with such inventory. If the model provides a similar function, only the internal pressure should be provided using the relief valve. Each connecting section is equipped with a gasket or O-ring. Over time, they deform, crack, weaken. The result is a leak.
instagram viewer
2. Clogging. Over time, small particles of dirt and soil will clog up the sprayer parts. Especially if the inventory is not thoroughly cleaned after use. If spraying is blocked, then one of the structural parts is clogged. It is enough to clean the unit and run water through it.
3. Lack of pressure. Most sprayer models are equipped with internal pressure pumps. Sometimes you may notice that the inventory does not spray liquid - water is pouring out of it in a stream, or the pressure has decreased. This problem is related to bad pressurecaused by cracks in pump assemblies or gasket wear.

You can use a garden hose to clean your inventory. Through it, a strong pressure of water is supplied, clearing the place of the blockage. But the preferred method of eliminating the problem is to clear the problem area with a thin needle or "blow". These options are more forgiving.

Mechanical damage to parts also leads to breakdowns. Such reasons cannot always be eliminated on your own. It all depends on the degree of damage. The sprayer uses not only water, but also various solutions. Some of them can corrode the parts of the unit, therefore they will need to be replaced.

How to fix a handheld garden sprayer

They start by looking for the problem. First you need to find out what exactly led to the deterioration of the garden device. The inventory is then carefully disassembled into its constituent parts.

If the cause of the malfunction is a blockage, then it is necessary to clean the problem area. This can be done with a thin needle, a strong pressure of water. Or use a small hand pump.

When the problem is in the gasket, it is simply changed to a new one. Additionally, you can use a silicate sealant to improve the seal. The resulting crack is removed with a special glue for plastic.

In some situations, it is permissible to replace the sprayer with a new one if the defect is too serious and the model itself is cheap. It will be more profitable to purchase another unit.

At the end of the repair, the structure is reassembled. It is worth remembering that safety precautions must be observed when working. If the sprayer has been used to spray chemical solutions and fertilizers, do not allow parts to come into contact with the skin. Moreover, it is forbidden to blow through the elements of the device with your own lungs.

Hand sprayers make it easier to maintain your garden. If the equipment is out of order, it is quite easy to fix it with your own hands in most cases. The main thing is to correctly find the cause of the problem and eliminate it.