Is it possible to carry gas to the garage: features of gasification of garage premises

click fraud protection

Dreaming of a multifunctional garage? Maybe you are an avid car enthusiast and have thought more than once about gasifying your parking box? Want to know more about it? So is it possible to supply gas to the garage, how to do it correctly, and how much money will have to be spent - there are answers to these questions.

We decided to pay attention to the issue of gas supply in residential buildings. The entire article is devoted to the use of gas in the garage, including theoretical and practical aspects. For those who do not have a car and a garage yet, the following will also come in handy, and perhaps in the not too distant future.

Let's face it, the arrangement of small objects like garages seems simple only at first glance. Their very location can cause difficulties with planning communications, and it is not at all necessary that they should be far from civilization. Gasification is about requirements, restrictions and a large number of actions. Therefore, we structured the information so that there are fewer questions with each new line.

instagram viewer

The content of the article:

  • Features of gasification of the garage
  • Procedure for obtaining TU
  • Difficulty connecting to the gas network
  • Actual requirements for garage spaces
    • Connecting a gas stove in the garage
    • Placement of heating boilers
  • Phased gas connection to the garage
  • Price range in different regions of Russia
  • Requirements for heating gas from cylinders
  • Conclusions and useful video on the topic

Features of gasification of the garage

According to SNiP 2.04.08-87 "Gas supply" in p. 6.32, gas equipment can be placed in buildings that are separate from or adjacent to residential buildings. Owners obtain permission from design organizations.

The authorized structure takes into account the presence of a gas branch for the implementation of such intentions, the geographical factors of the area. For rooms in individual buildings, the same criteria apply as for living rooms. The feasibility of projects and calculations depends on the gas operating specialized company.

An alternative in the form of an autonomous gasification

In case of problems with conventional gasification, there is an option with an autonomous supply from a gas tank, this is an ideal solution for a garage remote from the main pipes

The connecting branch to a non-residential or building under construction is installed according to an individual project on the basis of an agreement between the owner of the facility and the gas service. The active process starts after the customer receives technical conditions (THAT).

In this sense, the procedure is as follows:

  1. Submit a request for the preparation of technical specifications.
  2. Get TU.
  3. Draw up a written application for an agreement on accession to communications.
  4. Sign the document to connect.
  5. Obtain an order for the commissioning of a non-residential building.
  6. Sign an act on connection to gas communications.

The operational characteristics of garage spaces and their compatibility with gas appliances create a need for regulation and standardization.

Garage owners install gas boilers, stoves, burners, gas heat guns, but this can be hindered by the small size of the buildings, the absence of windows and other premises besides the main one.

Gas heat gun

The principle of operation of a gas heat gun is to draw in air and heat it up, due to which the room will be evenly filled with warm air.

You should not strive to gain access to main pipe, because there are also alternatives with cylinders and tanks for autonomous gasification.

Procedure for obtaining TU

The technical conditions for gas supply to the garage will be issued by the gas service at the place of ownership of the object.

Application for technical specifications

Application form for obtaining technical specifications for gasification: you can contact about the facility being designed, under construction or put into operation

The owner of the premises should submit the application itself for drawing up the contract, as well as the following documentation:

  • documents on the ownership of land;
  • identity card or official document confirming the authority of the representative;
  • topographic plan of the territory with the building;
  • technical passport;
  • the consent of the gas distribution company;
  • garage plan with smoke and ventilation ducts.

When issued, the customer receives the pressure parameters at the point of connection to the gas network, the minimum and maximum gas utilization rates per unit of time, description of system features and permissible gas consumption.

The owner of the garage with the TU in his hands has the right to go to court if he is refused connection. The decision is usually in favor of the plaintiff. The opportunity to go to court is also used in the event of a refusal to issue a technical specification.

Difficulty connecting to the gas network

It will be easiest if the gasification program includes a residential building, near or near which there is a garage. Areas within or near major cities are more likely to receive gas. In principle, there are no direct legal prohibitions on supplying gas to the garage - both for the use of gas boilers and for the use of other devices.

At the same time, there are still theoretical grounds for refusal. They are the specificity of the terrain and distance.

Gas pipe

Connecting an isolated allotment is accompanied by obstacles, but the owner in any case has the right to lay gas to his property

The connection of unfinished structures to gas networks is accompanied by insurmountable difficulties. If at the site of the new building there was an old and already gasified one, and there is no need to lay a branch, changes will be required to the existing project documentation for the facility.

The schematic plan will be issued by the Bureau of Technical Inventory (BTI) of the local administrative-territorial unit. The problem is that there must be an area on the drawing, and the BTI takes measurements only after the presentation of ownership of the new premises.

Actual requirements for garage spaces

June 6, 2019 entered into force Design rules for gas supply systems SP 402.1325800.2018, which were approved on the basis of the order of the Ministry of Construction and Housing and Utilities No. 789 / pr dated 05.12.2018.

There is still a rule of 50 mm headroom between the sides of the slab and the counters. As before, a 40 cm height interval should be observed from the same appliances to the burners. The new standards also do not prohibit the installation of double-glazed windows in rooms with boilers, but only if the structure of the glass allows them to be knocked out without much effort.

Connecting a gas stove in the garage

For this and other equipment, only sealed hoses made from safe materials are suitable. The length of the connecting elements must not exceed 1.5 meters.

Bellows gas connection

The most reliable and durable bellows gas hoses are made of stainless steel under a resistant polymer coating, with protection against aggressive environments

Gas will definitely not be connected if the new requirements for stoves are not met:

  • for gas stoves under a canopy, you need to use a blowout protection;
  • the stove must have a "gas control" system, and between the tap and the hose - a dielectric coupling from a stray current;
  • gas cooking appliance must comply GOST 33998;
  • at least 1 m of stock should be left from the slab to the opposite wall.

Plates for the garage, as well as for residential premises, should be purchased only from certified manufacturers, along with supporting documents for these devices.

Placement of heating boilers

It is impossible to install a gas boiler / water heater / boiler in the same space with a car. The way out of the problem will be the furnace compartment. Basic and additional requirements apply to a finished or attached garage space. Type 2 standards will have to be clarified with the local gas service.

Gas boiler in the garage

A gas boiler in a garage can be used, for example, for heating water or arranging a warm water floor system

Installation of a boiler in a garage will be acceptable if the building meets the following parameters:

  • non-freezing structure with an area of ​​at least 4 m² and a height of 2 m;
  • the door opens outward, and its width is at least 80 cm;
  • walls are made of non-flammable or low-flammable materials;
  • there is a window for ventilation and light, about 1 m² in size.

The garage must be present supply and exhaust ventilation. Its condition should be checked with a sheet of paper. In a working system, air in the supply ducts will repel the leaf, and in the exhaust ducts it will attract.

Phased gas connection to the garage

The process consists of 6 steps, and the first step is to choose a gas supply option. It is selected based on the heated area, the volume of the room, the average residence time and the number of people in the garage at the same time.

In the future, a draft of technical conditions is drawn up. The local gas service will consider the application within 1 month. For buildings at a distance of more than 200 m from the local pipe, alternative connection options will be needed.

At the next stage, a technical connection to the gas system is made. The insert is carried out by specialists of the gas service. The consumer should count on expenses in the amount of 25-50 thousand. rubles. The cost of work includes the prices for tie-in and installation.

Gas pipeline connection

A tie-in is made into a high-pressure gas pipeline for laying communications of individual importance - one of the methods is shown in the figure

The most costly component may be a garage gasification project. All equipment and planned gas communications of the garage are applied to the diagram. Each device, as well as the chimney, is "placed" at its exact location.

The procedure includes 2 alternatives:

  1. Contact the gas distribution company. It will be relatively cheap, but the lead time will be 3-6 months.
  2. Order the scheme in a private design office. The situation in terms of price and timing will be exactly the opposite.

Then they proceed to the installation of gas-using installations such as boilers, stoves, gas heat guns, etc. At this stage, customers turn to gas workers and stack contracts to carry out work.

After installing gas appliances, the consumer still does not receive fuel. Employees of the gas distribution organization must first check the safety of the devices, make sure that the conditions for operation are observed. The owner of the garage makes an application for this and waits for about 2 weeks until the specialists arrive at the site.

Upon arrival, gas service workers will instruct you on safety regulations and seal the meter. The check will be confirmed by a receipt, and soon it will be possible to talk about connecting gas to the garage as a fait accompli.

Price range in different regions of Russia

It's no secret that the cost of services differs depending on the territory. Taking into account this factor in general, and the convenience of the location of objects, residents of different parts of the country receive bills with a 10-fold difference in numbers.

Collection of documentation and obtaining technical specifications will "take" from 8 to 50 thousand. rub. The gasification project will cost 3-20 thousand. Each meter of wiring from the main pipe will cost 2-5 thousand. rub.

The insert alone costs up to 10-15 thousand in national currency. For the release of the inspector and the assessment of the readiness of the equipment, one will have to pay 1-2 thousand. rub. - quite a bit against the general background.

Requirements for heating gas from cylinders

Alternatively, you can use bottled gas. Containers should be kept in a closed metal cabinet for storing gas cylinders.

For its location, you need to choose a place as far as possible from heating devices and flammable appliances.

Gas cylinders

Gas cylinders in action: a quick and easy option, even taking into account the fact that you have to buy gas equipment, a reducer and valves

You cannot put the module with cylinders at floor level, because in this case it will not be possible to notice the gas leak in time and solve the problem.

Conclusions and useful video on the topic

Introductory material describing the principles and algorithms for gasification of buildings on the site:

Heating the garage with gas equipment, a description of the operation of devices and nuances in the arrangement of the room:

The possibilities of garage premises expand not only in terms of engineering work. Car owners also try to control the temperature inside the garage. They do this for the sake of the vehicle itself, working conditions, and also for the ability to normally store parts, chemicals and other accessories.

To have gas in the garage, you need to meet the requirements for the premises and obtain a technical specification. Then the owner will work with the documents for the project. The room must be supplied with gas, but only if there are no technical obstacles.

We are sure that you want to share your opinion with others. Especially for this, we provided the form below. Perhaps you have your own opinion on the problem of gasification of garages, or you want to talk about your situation. Describe the main difficulties, if not everything went smoothly.

Gas connection specifications: procedure for obtaining documents

Gas connection specifications: procedure for obtaining documentsDocuments And Design

More recently, the gasification of a private cottage took away a lot of nerves and money. The scope of this activity was strongly monopolized and had not always explainable prices. Now the situati...

Read More
Laying a gas pipeline to a private house: methods, equipment, requirements

Laying a gas pipeline to a private house: methods, equipment, requirementsDocuments And Design

Designing and laying a gas pipeline is a prerogative of specialized gas services; it is impossible to do this work independently. The owner of the gasified section is responsible for collecting th...

Read More
Hydraulic gas pipeline calculation: calculation methods + calculation example

Hydraulic gas pipeline calculation: calculation methods + calculation exampleDocuments And Design

For safe and trouble-free operation of gas supply it must be designed and calculated. It is important to perfectly match the pipes for all types of pressure lines, ensuring a stable supply of gas ...

Read More
Instagram story viewer