How to close the pipes in the toilet

Organization of the water supply and sewerage system Is a rather complicated and confusing process. It is impossible to exclude even one element, otherwise, everything will collapse, and the work will go down the drain. If the pipes are installed correctly, the communications are moving in the right direction, then it's time to tackle the aesthetic side of the issue.

Toilet

Content:

  • Disguise methods
  • Locker
  • Roller shutters
  • Partitions
  • False wall
  • Box made of various materials
  • DIY box
  • Advice

Before choosing a specific method for closing the communication pipes, you need to think about the possibility of free access to the systems. After all, the cases are different. Even a new pipeline can fail at the most inopportune moment.

The adhesion is unstable, the joints allow water to pass through, and the gaskets on the taps can leak easily. It is impossible to foresee everything. To fix the problem, you need to be able to get to the place of breakdown at any moment.

During the construction of a box for masking pipes, it is worth excluding the possibility of its destruction in the event of an emergency. This will entail additional costs in terms of time, money and effort.

instagram story viewer

Therefore, first you need to take all the actions to prevent a possible leak:

  1. Carefully check the joints of the pipeline for leaks, for defects.
  2. Use only materials that are designed for specific conditions. For example, pipes for hot water supply must be made of heat-resistant material. Otherwise, the problem cannot be avoided.
  3. The fewer connectors there are, the less chance of leakage. Flexible metal-plastic hoses are now relevant.
  4. Don't close old communications, because this is a time bomb that will inevitably explode someday.
  5. When installing the pipeline, observe all regulations: the corners must be suitable, the couplings must be made of the same material as the pipes themselves, and also avoid mechanical stress on the communication system.

Disguise methods

There are several popular methods:

Locker

Toilet locker

A practical and common way. As a rule, it is performed subject to the presence of a niche behind the toilet. Thus, it is possible to close vertical pipes by additionally placing a meter, filters and other necessary structural elements there.

In addition to the main purpose, such a cabinet can be equipped with shelves where tools, cleaning products are placed, many hide preservation. This option takes up a lot of space, however, you must agree, it is impossible to use it more rationally.

Installation features:

  1. First, free space is measured.where all pipe recesses and cuts are taken into account.
  2. Then the cabinet is custom madeas all sizes are non-standard.
  3. The box is installed and hinges for doors.
  4. The necessary holes are cut and the whole structure is attached to the wall with self-tapping screws.

Roller shutters

Toilet roller shutters

Rather, it is an innovation of modern construction and is not used in every case. We will talk about ordinary roller shutters that are used on the outside of windows. This method allows you to close the free space from ceiling to floor.

Installation features:

  1. The main advantage is the fact that there are no doors. There is no need to use a swing opening system. For a small room, this is a real find.
  2. In the case of installing roller shutters, there is one drawback - they are very difficult to install on your own, since you need to have certain skills. It is better to invite professionals for this purpose.
  3. Be sure to order roller shuttersmade of aluminum to avoid corrosion.
  4. If these are automatic roller shutters, you will need an engine with a moisture-proof clutch.

Partitions

Decorative partition

It is an excellent option for hiding pipes. It plays the role of a shelf and is made in those rooms where it is not possible to place the box behind toilet bowl. As a rule, these are small apartments.

This method of disguise looks very organic and convenient. They also help to divide the shared bathroom into separate zones.

Partitions can be:

  1. Concrete and brick - it is a radical solution that is established thoroughly. It is quite difficult to dismantle such a structure. However, it works great for hiding pipes. It can be mounted only if the pipes are plastic and are of high quality.
  2. Plastic - very easy to install, practical and moisture resistant. However, with poor-quality materials, over time, such partitions may turn yellow. Easy to dismantle if necessary. The base of the frame is made of profiles.
  3. Plasterboard - the most common and inexpensive way. Partitions of this kind can be painted, tiled or mosaic.

False wall

False wall in the toilet

Helps to drastically hide the pipeline, closing all communications with a solid canvas. Thus, the effect of the absence of pipes is created. The false wall lends itself to the same finishing as the rest of the partitions in the room.

This method is performed at the initial stage of repair in the toilet, since this is the only way to create a symmetrical space. The false wall is made of profiles that are located in increments of 30-60 cm. Plastic panels or gypsum cardboard are mounted on top.

Box made of various materials

The box allows you to hide pipes in any part of the toilet, concentrating all communications in one place. This method resembles the installation of a partition and false walls. It can be limited to only one part, not occupying the area of ​​the entire wall.

Distinguish:

  1. Square box. This design can be made of any size. Any width and height. For example, if the sewer pipe goes through the entire toilet and it is not possible to mount it into the wall, then a box is applied to the entire height. This is a rectangular structure, which is later tiled and covered with plastic panels.
  2. Multilevel box. The installation process is carried out in several stages. First, a square base box is mounted, then the second part is located on it, which, as a rule, has a smaller width and depth. Everything is done in order to make the most rational use of the space that is in the toilet. Multilevel boxes act as shelves, which is very convenient for a small room.

Such structures for closing pipes are extremely popular, since, in addition to their practical purpose, they have a very important decorative role.

DIY box

Box in the toiletThis is a fairly straightforward process. First you need to decide on the methodology, and then proceed with the choice of material and study of the step-by-step guide.

What material to choose:

  1. The first thing a person always focuses on, these are external characteristics. Naturally, even an ordinary pipe box should please the eye and not get bored over the years. Therefore, it is performed in the general style of the bathroom, so that it does not stand out visually.
  2. The chosen cladding material must be practical, shockproof and moisture resistant. Since the toilet is a place with high humidity, ceramic tiles, moisture-resistant drywall and plastic panels are used here. The most common is ceramic tiles.
  3. The design should be easy to install and can be easily dismantled if necessary.
  4. The material should not darken over time, change their performance and deform.

Required tools:

  • building level;
  • puncher;
  • self-tapping screws, dowels;
  • screwdriver;
  • screwdriver;
  • stationery knife;
  • roulette;
  • putty knife;

Necessary materials:

  1. Metal galvanized CD profiles, or wooden slats.
  2. Ceramic tile or plastic cladding panels.
  3. Drywall for the box.
  4. Tile adhesive.

Box in the toiletStep-by-step installation guide:

  1. First, choose a place to install: for this, a marking is carried out and the distance between the walls and pipes is measured.
  2. A frame made of metal profiles is attached to the wall, ceiling and floor with dowels.
  3. A corner profile is attached at the top and bottom, then horizontal partitions are stirred in 30 cm increments. Also, there must be a window for access to the pipes. A separate frame is made for it, where a metal box with a door is then installed.
  4. After installing the box, proceed to fixing drywall or plastic with self-tapping screws. It all depends on the further finishing. If you choose a tile, then a moisture-resistant drywall is mounted.

The advantages of this method:

  1. Fast installation.
  2. Simplicity and ease of construction. It can be dismantled without problems if necessary.
  3. Materials do not expand, environmentally friendly.
  4. Outwardly, such a box looks great.
  5. Low cost.

Advice

Toilet with locker

The most practical method for closing a pipeline is a tiled box. However, in some cases, this method is very difficult to implement.

Therefore, before making a decision, measure the space several times and decide on the material:

  1. A great option is lockers.to, where you can additionally store household goods and tools.
  2. False walls completely hide communications.
  3. Partitions will play the role of shelves and become a decorative decoration.
How to close the pipes in the toilet

How to close the pipes in the toiletRestroom

Organization of the water supply and sewerage system Is a rather complicated and confusing process. It is impossible to exclude even one element, otherwise, everything will collapse, and the work w...

Read More
Toilet shower

Toilet showerRestroom

In the event that your bathroom cannot boast of a special spaciousness of the room, then place some additional devices for the implementation of personal hygiene procedures are not so easy due to t...

Read More
Toilet installation dimensions

Toilet installation dimensionsRestroom

The installation is nothing more than the steel skeleton of the structure of the suspended plumbing system.Content:Dimensions (edit) ↓Frame system dimensions ↓Block system dimensions ↓Sizes of wall...

Read More
Instagram story viewer