5 Reasons Why burn outlet

Content

  • 1 Causes of fire receptacles
    • 1.1 Overload
    • 1.2 Poor contact with the wiring
    • 1.3 Problems with socket contacts
    • 1.4 Inconsistency outlet
    • 1.5 Burnout plate clamps

Cases of fire receptacles are not uncommon. We are not talking about the old models of the 80s, and of modern and and not cheap options. Danger blowout outlet not only damage the art, but in the fire (fire occurrence).

In today's world it is difficult to do without electrical work and home. It is important to monitor the serviceability of equipment and the timely removal of the cause, as the cause of fires is often a failure wiring. The main causes of burnout outlets:

Overload

Any socket designed for 250 watts and 16 (rarely 25) Am. If the load is exceeded, which leads to unpleasant consequences. Using common household appliances overload the outlet is not possible, but loaded the "deadly design ": an extension, a tee, a coffee machine, an oven, a heater and other instruments.

In order to avoid the causes of fire, it is not recommended to use at the same time more than three appliances.

instagram viewer

Poor contact with the wiring

The reason for the deterioration of contact between plugs and sockets Exposed wire, a metal oxidation. In most cases, this occurs with old rosettes at untimely maintenance device, which leads to overheating, sparking and burning.

Periodically inspect and urge the wires into the terminals.

Problems with socket contacts

Even the most high-quality plug, can not avoid the problems with the contacts. Sticking device contacts divorced in hand. With daily use contacts weaken.

In order to avoid this reason the contacts should be periodically bend as soon as the plug starts to become loose.

Inconsistency outlet

When instead of earthing-pin stuck into an old appliance, as a result she is shaken, weakened contact with the socket and plug are starting to warm up.

To eliminate the need to pull your reasons for plate clamps, tighten the bolts.

Burnout plate clamps

Because burning plates clamp contact is broken, which leads to ignition. Correct cause can be cleaned wafer by switching off the voltage.

None of the socket does not provide 100% immunity to burnout. Although ensure it will not be difficult, subject to a set of rules: the timely servicing of the device, replacement of the old to the new outlet.

Get rid of the fungus on the walls: useful tips

Get rid of the fungus on the walls: useful tipsHelpful Hints

The article offers several solutions to the problem of removing fungus, condensate from the walls and eliminating high humidity in the premises of your home. The dampness in the premises of your h...

Read More
What should not do the floor in the bathroom

What should not do the floor in the bathroomHelpful Hints

Content 1 Glossy Tile 2 A natural stone 3 Bulk floor 4 Tree 5 Linoleum The bathroom is the room with the highest humidity in the apartment. Not every coating can withstand such conditions, so ...

Read More
How to use the remnants of wallpaper after repair

How to use the remnants of wallpaper after repairHelpful Hints

Almost always, after the completion of repair work, the owner of the apartment or house has a certain balance of building materials. As a rule, the remaining volume is not enough to perform a full...

Read More