Installation of air conditioning in the apartment is a very responsible matter. The process involves laying pipelines in the wall for a split system, that is, breaking the wall. The strobe is a shallow groove on the front of the house. It is important to choose the installation location and the point on the wall where the device will be located. It is necessary to take into account the material of the walls, as the process of punching holes in brick or concrete will be significantly different from that in a wall made of wood. Depending on this, you need to select a tool for work.
The air conditioner should be located so that it can be easily reached from the street, if there is a need for repair or cleaning. The split system consumes a lot of energy, therefore, in order to prevent fire, the old wiring must be replaced.
How to ditch a wall according to the law
Many believe that you can punch any wall wherever you want. However, Government Decision No. 508 prohibits strobes in the load-bearing walls of apartment buildings. The fact is that in concrete houses in the load-bearing wall there is a vertical reinforcement that takes up the main load. The reinforcement rods are located at a small distance from the front surface of the wall and serve as protection for concrete. A stroba in a concrete wall to a depth of more than 3 cm will certainly damage the fittings. She will just be cropped. Thus, the impaired ability of the wall will deteriorate.
The brick house does not have protective reinforcement, but a hole in the wall also damages the brickwork, which can significantly increase the likelihood of further destruction of the wall. The ban on the gating of load-bearing walls also applies in brick houses.
Of course, from a single gate the house will not collapse immediately. But after all, if in an apartment building 100 people break through the load-bearing walls, then the strength of the entire structure will noticeably decrease. Over time, the material tends to accumulate fatigue. After a few years, concrete may crack in the house. In the worst case, the wall will simply collapse. And, as practice shows, such cases are not uncommon.
Therefore, only a non-load-bearing wall made of foam block or brick is allowed to be chipped under a split system or pipes. A fine is imposed on the landlord for illegal redevelopment. He will also be obliged to return everything to its original condition within the prescribed time.
-
What types of lamps are much better than LED
-
Will storage heaters help reduce electricity consumption?
-
What kind of people make mistakes when choosing the sizes of a shower cabin
-
Advantages and disadvantages of a bunk bed
-
How to make a primer from bitumen mastic
-
What difficulties can arise when combining tiles of different sizes
-
How to challenge a new property tax
-
Why does the socket not let in the plug of the appliance?
-
The most reliable wire connection without a soldering iron
-
What tools are bought in vain for repair
-
Water consumption rates per person
-
How to equip a narrow bedroom
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
