The need to receive electrical work is needed in several cases. Most often, people have to face a similar issue when buying a new home or during a renovation. Not every person has an idea of what properties a normally executed electrical network should have and what special attention should be paid to. Consider what are the effective ways to assess the quality of electrical work performed.
Modern wiring must include three fundamental principles:
- Hiding - no elements should be located in a conspicuous place (except for sockets and switches).
- Ease of commutation of shields and distribution boxes.
- Unobstructed access to all connections or connectors.
It is important enough to stipulate all these points in advance, and also to check them before the gates are closed. Otherwise, nothing will be fixed.
In order that the inner conductors of the wires do not experience unnecessary loads, they should not be laid with sharp corners. The entire cable is laid freely, with rare rounding.
The second step in accepting work is to use a high load. Connect high power appliances or several household items at the same time. An unnatural load will allow you to establish the performance of the RCD, as well as to eliminate the likelihood of a marriage of lines.
If the power grid has passed the test, nothing has closed and stably continued to work, then we can proceed to check the quality of the connections. Armed with pliers and completely de-energizing the room, you can begin to gently pull the wires. This will eliminate the likelihood that the connections are poor. The main thing is not to make too much effort so that your actions do not cause damage to the cable.
If it was not possible to carry out a check sequentially during operation, the optimal solution will be to verify the quality of the fastening of visible elements. Switches, sockets, junction boxes, and other network devices must be firmly fixed.
In order to simplify the reception of work, as well as to avoid disagreements with workers, it is recommended to divide the whole process into several stages, each of which should be taken separately and documented.
-
What type of solvent is not suitable for nitro enamel
-
What is often forgotten to consider when choosing a chandelier
-
Why a fireplace is a waste of money
-
12 tips for choosing a good construction team
-
What do people overpay for when buying a gas boiler
-
What primers are not suitable for application under fiberboard
-
What mistakes do when fixing platbands to a concrete wall
-
Why is it better not to glue the wallpaper with an overlap
-
Where can I not use liquid glass?
-
What type of fence is not suitable for a private house
-
What common mistakes are made in measuring a room
-
What paint should not be washed
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
