For any owner of a private house an acute issue of energy efficiency. In order to create the optimum indoor temperature in the cold season to reduce heat loss, and thereby minimizing the cost of heating it is important to pay attention to insulation, not only sex, but also ceiling.
Most noteworthy is the roof, according to experienced professionals, she misses about 30% of heat energy. And in this case there is a logical question, what kind of material is best used for insulation, because the modern market offers a wide range of products.
What to look for when warming
Since the material is really a lot, sometimes it is difficult to make the right choice. In this case, every owner wants to save money and buy a heater that requires less maintenance. Of course, the question is quite complex and requires a detailed study, and it is best to pay attention to the following points:
- Coefficient of thermal conductivity. The lower the figure, the thinner layer of material is required for installation.
- Moisture absorption. Due to the temperature difference in the roof space is always formed condensate. That is, over time the moisture has penetrated deep into the insulating material and eventually destroys it. That is, it is best to give preference to the insulation with a minimum indicator of moisture absorption.
- Fire safety. Flammability - is another important factor, which should pay attention.
- Density affects the supporting structures of the roof.
Do not forget also about the vapor permeability, environmental friendliness, difficulty in carrying out the installation. It is best to understand all the nuances, and in this case it is possible to achieve the maximum energoeffektvinosti.
materials
Often, the consumer pays attention to the mineral wool. During the manufacturing process the fiber material used is rock and slag. The manufacturer offers a plate that is easy to install.
Benefits:
- Additional sound insulation.
- Resistance to rust and rot.
- Resistance to combustion.
- Simple installation process.
- Resistance to deformation during temperature drops.
It is also worth considering, and insulation foam-based. The manufacturer offers a material in the form of plates, that is, in the case of problems with the installation will not.
The main advantages include:
- Low weight.
- Resistance to corrosion and appearance of the fungus.
- Environmental cleanliness.
- Additional sound insulator.
- Low rate of thermal conductivity.
