The roof of any building in its design has a multifunctional character. In addition to decorating the home, she protects it from various external negative factors of natural species, such as rain, snow, hail, and direct sunlight. Any roof structure consists of two main elements - the rafter system and the type of roofing system. It should be noted that an essential element of truss system is its crate, which serves as a support for roofing in general. To ensure that this design has been the most reliable should figure out how to put the crate the most simple manner and in a short time.
The main installation technology
Mounting batten represents the technological process of construction works and successive if they are carried out correctly and accurately, it is necessary to obtain the maximum design quality. By themselves, these works are quite simple, and they should include:
- Once installed rafter frame type should carefully execute complex measurement of the entire roof surface. To do this, a cord of nylon fabric to check the values of the diagonals of all roof slopes. It should be noted that the error in the deviation must not exceed 20 mm, since if this parameter exceeds said value, the further problems may arise in fixing tangible roof.
- Further processing should be carried out all construction elements made of wood with a special solution antiseptic form, in order to further maximize avoid rotting process and damage from insects.
- Produced laying waterproofing type the rafters.
- Performed installation work slats lower species. For this purpose, a special timber having a large cross section.
- Further boards are stacked with a fixed pitch. It should be noted that for each type of flooring it is measured and is determined on an individual basis.
- If you need to, it is necessary to carry out insulation, in particular the need for an initial layer to put cotton wool mineral species and then placed second obreshetochny layer.
- Ultra boards are stacked with each other as much as possible, so that they can be used in the future to design the ridge structure.
- Fixing work in the end carried out on both sides of crates, and if the flight is large enough, use an additional type of fixation.
From the above points, it is possible to mount the crate quickly and efficiently in a simple manner.
