Everyone is truly striving to make their home unique, but at the same time they pay different attention to different rooms. Most often, experiments begin to be carried out in a bedroom, since it is hidden from others and can be fully framed only in accordance with the wishes of the owners. Making the bedroom interior unique is not so difficult. Only half an hour, for example, will be required to organize lighting under the bed using LED strip. You can cope with its installation yourself.

There are several LED strips, so you will need to start with the choice of this material. 220V LED strips are considered the most affordable. But for the bedroom, this option is not very suitable, as the emitted light turns out to be too bright and can not be adjusted. Ordinary LED strip, which is sold literally everywhere, also does not require large expenses. But it will be necessary to purchase an additional unit.

RGB tape is an option for those who want to make the lighting under the bed unusual. There are many options for shades in such a tape. A special remote control can be used to control the glow. RGB controller and remote control are sold separately from the tape.

The cost of these options is different, but in practice, the investment justifies itself. The interior looks better, the more expensive materials for lighting used.

The required tape length is pretty easy to determine. To do this, you need to decide exactly where the LEDs will be attached and measure the bed. At least five percent should be added to the data obtained in order to avoid possible problems in the future. Connection issues should be decided in advance. The options depend on the selected type of LED strip.

The lower part of the bed is best suited for fixing the backlight. Lighting in this case is optimal for the bedroom. For a long time, the tape can hold the clamps on itself. If you can not use them because of the features of the bed, you can pick up other options. When using glue, degrease with refined gasoline or alcohol at the attachment point. After mounting the tape and connecting with each other all the elements provided, it is necessary to check the operation of the backlight. With the right actions, she will immediately begin to work.

Durlayt instead of LED strip can also be used. It will cost less, but its characteristics are practically the same. But at the same time, some people do not like its glow, so you need to focus on personal tastes and preferences.



-
Why there are not many outlets
-
Why it is impossible to paint a door on old paint
-
Is it possible to connect the LED to the 220 volt network
-
Mini-refrigerators: principles of work and advantages
-
How to make a drywall fireplace with your own hands
-
How to make a huge LED
-
How to get three phases from one
-
Simple inverter without transistors
-
Submersible pump from the washing machine pump
-
10 rules on how to best repair an apartment for rent
-
The advantages of houses up to 150 square meters. m
-
Soundproofing and soundproofing of plastic windows
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen