How to make a threshold for joining the floor at different levels

Proper arrangement of the floor sill eliminates possible inconsistencies in its height, therefore, gaps here are completely eliminated. And this eliminates the hypothetical ingress of dust and various dirt into the free holes.

The choice of the threshold should be approached very carefully, because there are its main varieties:

1. Metal. In their strength properties they deserve close attention.
2. Wooden. Under the door leaf, this option externally fits very harmoniously.
3. Plastic This is a more budget option, since other types of such a finishing component are much more expensive.

As soon as a specific type of door sill has already been selected by the client, the following task arises before him, aimed at its installation. If it is carried out correctly, then the work will not notice for more than 20 minutes. During their course, the master must:

• lay the threshold in place of its subsequent fastening, trying on it;
• points at which special holes will need to be made are marked;
• with a drill, holes are drilled inside the canvas for a specific installation of screws;
instagram viewer
• under the finishing material in its initial position, first 2 front screws are screwed, and then 2 extreme;
• at the end they check how the door closes. And if the technology is not broken, then there should not be any difficulties.

Setting the threshold is not only an important decorative step, allowing you to give the room a more perfect appearance, but also a weighty practical argument. Thanks to it, you can successfully dock different surfaces of the floors and try to smooth out such differences in level as much as possible. This is especially important at the very borders of the transitions from one room to another or into the corridor.

And here, a high-quality installation of a nut somewhat eradicates the striking factor of unevenness of the genital base. At the same time, this part must strictly correspond to the size of the doorway, completely coinciding with it. Therefore, it is worth choosing a threshold only after accurate calculations have been made of the same axis of the floor. Only by operating with exact numbers regarding the width of the passage to a room can one successfully select a certain threshold.

If there is no experience in such a matter, then it is quite risky to take it on your own, so it may arise the need to take advantage of the practical help of specialists who know a lot about their everyday work!