How to keep the toilet in order with vinegar

Many people are ready to talk about the cleanliness of the toilet, and washing it is usually inferior to a woman. This is understandable: after washing, clean plumbing without unpleasant odors, of course, looks attractive. But rubbing it to a shine is still a pleasure... It's good that home appliance manufacturers have developed many different formulations to help cope with this job. Their efficiency suits the housewives, but the price does not! After all, you have to literally throw a lot of money down the toilet!

True, folk wisdom has found a way out of this situation. More precisely, they found an inexpensive but effective remedy that perfectly replaces household chemicals. Vinegar became such a remedy! Yes, yes, the same one that is usually used in the preparation of a variety of dishes.

An acid that's good for plumbing

Acetic acid is a substance whose properties are indispensable in the household. Including when cleaning plumbing. In the bathroom, vinegar can do a lot:

• Dissolves formed on the surface of porcelain and earthenware limescaleremoving urinary calculus.

Reference. Calcium and magnesium salts dissolved in water become the cause of the appearance of limescale (urinary calculus) on the toilet. Currently, it is not possible to completely purify the water.

• Removes rust with metal parts.
• Eliminates unpleasant odors.
• Promotes high-quality sanitization and disinfection of plumbing fixtures, destroys bacteria and harmful microorganisms.

How to use vinegar correctly

When using acid, it is important not only to take advantage of its useful properties and capabilities, but also to ensure the safety of plumbing. Therefore, the substance should be used correctly.

Important! When using acid, it is necessary that the earthenware or porcelain from which the toilet bowl is made is dry.

Option 1

• We block the access of water to the toilet. We drain the water from the tank.
• Wipe the surfaces with a dry cloth.
• We moisten a clean napkin abundantly in vinegar.
• We apply a napkin to places with lime deposits or other contaminants. We leave for a few hours. Depending on the degree of soiling, the napkin can remain on the porcelain or faience surface from 2 to 6 hours.
• After the end of the exposure, the toilet bowl must be washed with a brush, cleaning off the plaque. It will be removed easily.

Option 2

• Pour 2 cups of vinegar (9%) into a small saucepan.
• Place the container in a larger pot filled with boiling water to make the substance warm.
• The heated composition is poured into the toilet, leaving for several hours. The lid must be closed all this time!
• They wash the toilet with a brush, you can add soda.

How to increase the impact

The result will be even more effective if you combine vinegar with other substances. The procedure for this will be somewhat different.

Soda

• Vinegar (1 glass) must be warmed up. To do this, put a container with vinegar in hot water and leave it to become warm.
• Add 1 tbsp. l. soda, mix and pour into a tank.
• After a few hours, the water with the added mixture is drained.
• If after one procedure traces of limescale remain on the surface, the process is repeated again.

Other additives

Instead of soda you can use iodine. It is added to warm water to form an iodine solution. Then the resulting composition is combined with heated vinegar. The two components must be connected in equal parts (1: 1).

Then proceed in the same order as described above, adding the cleaning mixture to the tank.

Some housewives claim that vinegar can be replaced with citric acid or even Coca-Cola.

You can check the effectiveness of these funds yourself. But you don't need to check the vinegar, this has been done more than once. He helped many housewives, so we hope that he will help you out too.