Bathroom scales are a modern device that can be found in almost every home. It can help control weight changes while maintaining a healthy body. To use this electronic device correctly, you need to know the main features of its operation and the possible types of errors that occur.
Bathroom scales show Lo - what it means
The content of the article
- Bathroom scales show Lo - what it means
- What other messages can be seen on the display of the scale
- How to properly care for your appliance
- What rules should be followed when weighing
If the electronic floor scales displays the inscription Lo (from the English. low - low), then such a warning indicates a low battery level. To fix this, you need to replace the battery.
You can find out the type of battery you need in the instructions for the device or simply by removing the old battery and choosing the same one in terms of characteristics. Usually it is located at the bottom of the device and to remove it, you just need to open the lid.
It is worth noting that it is better to change the battery immediately after the warning message appears, since if there is a lack of energy, the scales will show inaccurate data. After replacing the battery, they will work properly again and show the correct data.
What other messages can be seen on the display of the scale
The device can display notifications about errors and malfunctions. Sometimes their appearance is for informational purposes only and does not mean a breakdown or malfunction.
The electronic scale sometimes displays an error warning message: Err or "8888". With this notification, the system informs about an accidentally occurring measurement error. This does not indicate a malfunction of the device. It is necessary to get off the scales, wait for the readings to reset and repeat the weighing.
If the screen has stopped displaying data, this may be due to the transition of the touch keyboard to power saving mode. To restore the active mode, it is enough to release them and press the buttons again.
ATTENTION! Press on the touch panel with your fingers, without using additional objects.
If the meter is displaying inaccurate readings, the problem is most often an uneven plane or incorrect calibration. You can clarify the correct settings for a specific device model using the instructions supplied by the manufacturer.
How to properly care for your appliance
When caring for your bathroom scale, it is important to carefully clean the top of the cabinet. Do not use harsh powders and steel wool, as they can scratch the surface. To clean the appliance, simply wipe the outer cover with a damp cloth and liquid detergent.
IMPORTANT! The balance must not be immersed in water, as water may get caught in the electronic mechanism or the battery. In the event of liquid penetration, the mechanism will quickly fail.
It is required to store electronic scales in a horizontal position. You cannot place extraneous things on them. When not using the device for a long time, it is advisable to remove the battery from it so that it does not discharge.
What rules should be followed when weighing
To obtain the most accurate readings, it is recommended to measure under the same conditions. To do this, it is advisable to weigh yourself at the same time of day without unnecessary heavy clothing.
The following rules apply to the use of electronic floor scales:
- stand on the surface with clean feet without shoes;
- when weighing, the legs must stand separately;
- the frequency of measurements can be individual - once a week, daily or several times a day.
If the device provides the ability to determine the ratio of muscle and adipose tissue, then the principle of its operation is to supply electrical signals through the skin. Therefore, for this option, it is important that the legs are dry and not in contact with each other (if it is inconvenient to put them separately, you can place a sheet of paper or other insulating material between them).
It is not dangerous to measure weight with such a device during pregnancy, but it may incorrectly calculate the ratio of fat to muscle. For an ordinary person, such a current is completely harmless, however, there are contraindications to the use of diagnostic scales.
ATTENTION! It is prohibited to use electronic scales that determine the fat mass index if it is available in the body of the pacemaker, since it will lose its rhythm or fail due to electrical impulses.
In order to track the change in body weight over time, you should use one device, since different devices can show values with a small individual error.
All these recommendations will allow you to use electronic scales correctly and extend their service life. If the device malfunctions and replacing the battery did not help restore its performance, you should contact a specialist or purchase a new device.
