How to clean a toilet cistern from rust from the inside: the reasons for the formation of plaque and rust in the toilet cistern

Every good housewife knows that all plumbing requires careful, regular maintenance. This not only maintains the attractive appearance of the products, but also prolongs their service life.

For obvious reasons, the toilet deserves special attention. Moreover, you need to clean not only the product itself, but also the drain tank. On its inner surface and elements of the drainage mechanism, plaque and rust also form over time. If they are not removed in time, the product will fail.

Reasons for the formation of plaque and rust in the toilet cistern

The water we use contains a large number of various impurities. Even after several stages of cleaning, some of them remain, including limestone. Once in the toilet cistern, they settle on the walls and the flush mechanism.

At first, limestone forms a small layer over the entire surface. But if it is not removed in time, stone deposits gradually begin to form. Removing hard deposits is much more difficult than a thin layer of limestone. In addition, old plumbing pipes add rust. It settles on the inner surface of the tank and becomes denser and thicker over time.

Reference! The harder the water, the faster a layer of limestone and rust forms in the cistern.

Small particles of rust are deposited on all internal elements of the tank, including the drain mechanism. Because of this, its normal functioning is disrupted, and if the plaque is not removed, the mechanism will fail. Water will begin to flow out of the reservoir. Pathogenic bacteria, mold will develop in it, an unpleasant odor will appear.

Reference! With regular and timely maintenance of the toilet cistern, you can extend the life of the product by more than 40%.

How to remove rust and yellow plaque at home

You can remove limescale and rust yourself. This is done both with the help of store cleaning products and folk methods.

Reference! Traditional methods sometimes have a stronger effect than purchased funds.

It should be borne in mind that you can achieve maximum results only by choosing the right cleaning agent. You need to choose a product taking into account the material from which the tank is made. So, for ceramic tanks, substances containing acids should be used, and for metal ones, softer alkaline solutions.

Reference! Before cleaning the tank, you must prepare gloves and shut off the water supply.

With the help of store tools

If a small layer of limescale and rust has formed on the inner surface of the tank and on the drain mechanism, they can be dealt with without the use of concentrated cleaning agents. To wash the tank, you can use "Pemoxol", "Cinderella", "Pemos" or "Myth".

In the event of a strong raid, "heavy artillery" will be required: "Sanox", "Biocid-S". The products are able to remove any dirt in a matter of minutes.

Also on sale are gels that are especially popular:

1. Cilit. There are several varieties designed to deal with specific contaminants: against rust, for removing limescale. In addition, "Silit" will remove dull stains and restore the former shine of the plumbing.
2. Domestos. The substance has a thick viscous consistency, perfectly removes dirt and disinfects plumbing.
3. Comet. It copes well with dirt of any intensity. But before use, plastic parts should be dismantled - the substance has a negative effect on them.
4. "Dressing Duck". An inexpensive tool that does an excellent job of the task and refreshes the plumbing.
5. Sanita. It is able to remove even old rust deposits.
6. Sanfor. An excellent product that not only removes dirt, but also removes mold and mildew. They can clean all plumbing, as well as tiles.

Attention! The cleaning composition must be kept on the surface of the plumbing for the time strictly indicated on the package.

Folk methods

For folk methods, the following means are used:

1. Vinegar. Mix a small amount of vinegar with water. The resulting mixture must be poured into a tank and left for several hours. After that, drain the solution and carefully wipe the inside of the tank with a hard sponge.
2. Toothpaste. You need to make several holes in the tube of paste and put it inside the tank. Each time the water is drained, a self-cleaning process will take place.
3. Lemon acid. You will need 5-10 sachets of acid. You need to pour their contents into a tank and pour water at room temperature. Stir the solution thoroughly until all acid crystals are completely dissolved. Leave the composition for 3-4 hours, then rub the walls of the tank with a hard sponge or a brush.
4. Coca-Cola. Quite a non-standard option, but sparkling water is excellent at removing plaque and rust. Pour a few bottles of Coca-Cola into the tank, leave it for a couple of hours. After this time, rub the walls with a brush.

Removing deposits and rust is easy enough. But in order not to waste time on long-term cleaning, it is important to regularly wash the inside of the tank. After all, fresh deposits can be removed with an ordinary damp cloth, without resorting to the use of strong chemicals.