How to glue a ceiling plinth with your own hands: instructions

Ceiling plinth is a decorative element that covers the corner between the wall and the ceiling. Previously, this element was used only to mask the space that forms between the wall and the floor. However, more and more often we can see the plinth framing the perimeter of the ceiling. Now it is difficult to imagine a modern room design without it. Thus, a person who is going to make repairs has a question about how to glue the ceiling plinth.

We advise you to pay attention to this type of decoration. It has many benefits. For example, it hides defects and gives the interior a special charm. Let's take a closer look at all the nuances.

Attention! Earned on our website kitchen designer. You can familiarize yourself with it and design your dream kitchen for free! May also come in handy wardrobes designer.

What you need to know about gluing skirting boards

In addition to the decoration function, the baguette is able to cover the wiring. Therefore, most skirting boards are hollow. They are attached after wallpapering and finishing the ceiling. By the way, the ceiling can be any: stretch, whitewashed, etc. The material of the wallpaper does not matter either. Styrofoam skirting board can be glued to any modern material. This process is the final stage in the repair. The biggest difficulty that can arise is joining the corners. If you do not know how to do it correctly, it is better to seek help from specialists.

How to cut

The first baguette is installed from the corner closest to the entrance. You can cut it with a miter box (U-shaped device). On both sides of the miter box there are special slots with the desired angle. We install a plinth between these sidewalls, and a hacksaw is inserted into the slot from the outside. After this manipulation, you can start cutting. Use an electric jigsaw to get a perfect cut. But if you are not a professional craftsman, then it is unlikely that you have such a tool. You need to cut it out very carefully. Careless movements can delaminate or crumble the foam.

Sticking procedure

Now let's talk about how to glue the ceiling plinth with your own hands. After its preparation, glue is connected to the case. Turn the baguette upside down. Glue is applied to both sides of the fold. There is no need to smear it over the entire surface, just apply along the entire length. Next, we apply the plinth to the surface and fix the position for a while. There are also plastic models. The important point here is to fill all the spaces formed between the wall and the skirting board with sealants. This is done with a spatula and around the entire perimeter of the room.

Gluing the skirting board in the corner

Let's consider how to glue the ceiling plinth in the corners. The angle can be either internal or internal. It is worth clarifying that the first has a value of 90 degrees (the usual angle between 2 walls), and the inner one is rare and it is about 270 degrees. However, the technology for gluing the molding is the same - joining two strips. We use the same miter box to cut the fillet. It is important - the side of the plinth, which is pressed against the side of the tool when cutting corners, will be located on the same side when gluing. It is also pressed against the underside of the tool. In the inner corner, the bottom side will be above the top. It is necessary to measure the angles between the walls. If the angle is 90 degrees, then cut off at 45. If there is a different value, we divide it in half.

A putty is used to fix the stucco molding. Before applying it, polish the uneven surface and apply a primer to increase the drying time, thereby making installation easier.

To make the task of gluing the ceiling plinth in the corner easier, a step-by-step video will help make the procedure quicker and easier.

Varieties of adhesive for ceiling plinth

Ceiling skirting boards can be glued with various adhesives, depending on the molding material. Since the most popular material is polyurethane, we note the best brands of adhesive for polyurethane skirting boards:

• "Titanium";
• Eco-Set;
• "Moment".

All adhesives of the above brands have a viscous structure, quick drying and quick retention of the baguette in contact.

The first two adhesives are transparent and have strong adhesive properties. The Moment glue immediately holds the material together, so it is not necessary to maintain it for some time, unlike Titan and Eco-Set. In addition, it can be used with a nailer.

There is a polymer-based adhesive. They require the obligatory presence of a solvent and good ventilation of the room.

Liquid nails are versatile. They can be neopropylene or acrylic. Neopropylene has a strong odor and is unsafe until dry. Acrylic nails are safe, have an unobtrusive smell, but are not resistant to low temperatures, and when they freeze, they completely collapse.

Conclusion

You have chosen a ceiling molding as a decoration for the ceiling. Using this element, you can decorate both the outer and inner corner of the room. Use a miter box to cut material. The bonding of the skirting board does not take long. If you own the technology, learn in advance all the nuances, prepare all the necessary materials, calculate the price per running meter in advance, then the result of the work will undoubtedly delight you. Don't have time to renovate? In any city (be it Moscow, St. Petersburg or others) there are many good specialists who will help you do your job as efficiently and quickly as possible.

Video: recommendations of the master for gluing the ceiling plinth