The best ice drill screwdriver: for winter fishing, rechargeable, Chinese, inexpensive, photo, price

The pleasure of winter fishing can be spoiled if the ice drill screwdriver bought in advance does not stand the test of frost, and the hole in the thick ice will have to be drilled manually. And this is considering that an experienced fisherman in search of a good place can do up to a dozen holes. Enough work for a cordless power tool.

What to look for when choosing

Most winter fishing enthusiasts with little experience do not really think about which screwdriver is better for an ice drill. They take home, the one that is bought and gathers dust idle in the workshop. An adapter and a drill have already been selected for it, so there are no problems.

And only beginners or real fans of ice fishing buy a special tool. The first are guided by the rating of ice drill screwdrivers. The second choose a tool based on their experience, trying to combine price and quality. And they do it right, since the requirements for a "shurik" for winter fishing are somewhat different from a conventional power tool:

1. Torque of at least 50 Nm for carbide-tipped ice drill and geared adapter. If you turn the first ice screw that comes to hand with a screwdriver, then a moment of at least 70 N * m will be required.
2. Since the ice drill cuts ice with the right rotation of the auger, and the adapter is ordinary, then you will need to look for a screwdriver with the same direction of rotation of the shaft.
3. The gearbox must be free of grease, both on the gears and on the bearings. Any options with fluoroplastic inserts will do. This is a guarantee that the grease will not freeze at -15OC, and the screwdriver will not jam.
4. For winter fishing, it is advisable to look for a model with additional protection of the hull from moisture (water vapor). Usually these are Japanese or German models.

Any screwdriver for winter fishing needs to be checked complete with a drill. It is very important how well the cutting edge of the auger removes ice. For some forged metal models, a drive of 50 N * m is enough, for the simplest screws, sometimes 70 N * m is not enough.

It is still advisable to buy a screwdriver with silicone protection, so as not to wrap the tool with electrical tape or adhesive tape. Moisture and vapors must be avoided at all costs. Condensation or melted snow will definitely kill the control board or may short out the battery.

And one more thing - an ice drill screwdriver, even taken from the ranking of the best, should definitely be inexpensive.

Which drill is suitable for working with a screwdriver

First, choose the diameter, usually at least 120 mm. If the ice screw is made correctly, then 150-180 mm is possible. The auger and rod itself is made of structural steel. On the head, you will need to weld a hexagon to attach the adapter. The ice drill shaft must have a sliding handle to hold and guide the tool with the second hand.

The cutting edge on the ice screw is made of forged alloy steel. No hard plates. The ideal option is to make several interchangeable nozzles from an old spring from Moskvich or Volga. If properly sharpened and fixed (with rivets), then a home-made ice screw will last longer than the vaunted Tonar, Asseri or Alligator.

How powerful should a screwdriver be

Since you will have to work with an ice drill in good frost, the power of the screwdriver's engine does not really matter. Weak torque can always be compensated by the adapter reducer. Even the most inexpensive models will have enough of it.

Batteries, which quickly lose their charge in the cold, are another matter. Optimal - lithium-ion batteries 18 V or 20 V. For one fishing trip, one Li-Ion battery with a capacity of 2A * h is enough. All other options, nickel-metal hydride or nickel-cadmium, are money thrown away.

What adapter for a screwdriver is better to take

Often fishermen immediately buy a good quality ice screw, Heipola or Asseri, in the hope of drilling the ice with their hands. After a couple of exits on the ice, it becomes clear that it is better to turn the ice screw with a battery drive. In this case, you can use a regular line adapter. This is just an adapter with which you can connect the socket (under the bit) of the screwdriver to the hex shank of the ice drill.

For home-made ice drills and screwdrivers with weak batteries, it is better to immediately buy a gear adapter. As the batteries age, there will be less and less energy to turn, and the gearbox compensates for the low torque.

How many batteries do you need

For one output, 2 cans of lithium-ion batteries of 1.5 Ah will be enough. Sometimes even one is enough. But fishing is better to take a couple if you plan to actively drill holes.

Li-Ion has a strong self-discharge in the cold, so they are stored separately from the screwdriver, usually in a woolen case (in a bag) along with a stainless steel thermos. As soon as the work with the ice drill is completed, the batteries are returned to the bag.

This is useful! The best cordless screwdrivers: 2023 rating, review, price and quality.

The best ice drill screwdrivers by price / quality for 2022-2023

Ice drilling requires a reliable and powerful tool. Winter fishing conditions can be considered extreme for the operation of a cordless screwdriver, so the risk of breakage increases several times.

The best ice drill screwdrivers with torque from 60 Nm

Paired with a simple linear adapter and a conventional drill, it is advisable to use a powerful model from one of the well-known brands.

The third place in the top of the best is Ryobi ONE+ HP RDD18X. Powerful tool with 18V motor and 95 Nm torque. The advantage of the design is a brushless motor, it is equipped with 1.5 Ah batteries, but any of the Ryobi 18V series can be used with a screwdriver. Price - 8980 rubles.

Second place - AEG BS18G4. Torque - 65 N * m, supply voltage 18 V, the screwdriver is equipped with 2 batteries with a capacity of 2 Ah. There is a bracket to which you can tie a cord so as not to drop or drown the tool while working with the ice screw. Price - 11200 rubles.

First place - Makita DF002GZ. Equipped with 40V brushless motor, 64Nm torque.

The design uses electronic speed control, as well as XPT technology for enhanced protection against moisture and water vapor. Works with lithium batteries 1.5A*h. Price - 10500 rubles.

The best ice drill screwdrivers with an additional handle

For short ice screws, you can use a tool with two handles. In this case, most of the load falls on the adapter and on the side handle of the screwdriver.

One option is a screwdriver. ZUBR "Professional" DB-201-22. The tool is equipped with a 20 V brushless electric motor and a "dry" gearbox that develops a torque of up to 70 N * m. The side handle is removable. Two accumulators (replaceable and main) on 2A*h are delivered in a set. Price - 11820 rubles.

It is better to turn the additional handle up, and not sideways. In this case, the ice screw can be held with two hands, much like the handlebars of a bicycle. It is possible to rest with your feet, the load on the hands is approximately the same. And yet, there is less chance of dropping the ice screw into the hole. This happens, therefore, on a screwdriver, a tape repic is threaded through the bracket on the handle. Attached to the arm or neck, as you like.

The main thing is to pick up the ice screw in time, not to let it dive into the hole. Nothing will happen to the auger, but a cordless screwdriver from diving into water can burn out due to a shorted battery.

Another model is Hanskonner HCD1865BLC. It is possible to install an additional side handle. 18V brushless motor delivers 65Nm of torque. It is completed with two accumulators on 2,4 Ah. Warranty for 25 months, price 13350 rubles.

The screwdriver turned out to be really convenient. But the engineers obviously overdid it, there are too many ventilation holes in the tool case to cool the motor. Before going fishing, it is better to seal them with tape or adhesive tape.

From domestic models, you can use the Vityaz DA424-2 with an additional removable handle, a 20V brushless electric motor and lithium-ion batteries with a capacity of 3 Ah. The design feature is a huge torque of 100 N * m, so the screwdriver can be put on an ice drill with a simple adapter. The capabilities of the tool are enough to drill the most difficult ice to a depth of up to 70 cm.

The model is powerful, so it’s better to immediately buy a branded titanium ice drill and a stainless steel adapter for a screwdriver. If the ice screw is collapsible, then under heavy load, you can easily cut the key on the connection, and the lower part of the screw will simply dive into the hole.

The only negative is the significant weight of the power tool, 2.3 kg. Price 13200 rubles. with 1 year warranty.

This will come in handy! 12 best corded screwdrivers for home and work: review, pros and cons, price, photo.

The best ice drill screwdrivers with two batteries

If you choose the characteristics of the gear adapter correctly (gear ratio 1.5-2), then in order to turn the ice drill, an inexpensive screwdriver with two batteries of 1.5-2 Ah each will be enough.

Of the most reliable tools, the Resant D-20 2 LK-B 75 screwdriver with a five-year warranty can be noted.

Characteristics:

• operating voltage 20V;
• torque 55 Nm;
• there is a reverse and a battery discharge indicator (on the case);
• the kit includes 2 batteries (Li-Ion) with a capacity of 2A*h.

The weight of the device is only 1.3 kg, so the screwdriver will not be a burden on winter fishing. Price 7600 rubles, 60 months warranty.

Resanta D20 is one of the few screwdrivers that can be taken fishing with one battery. A DC motor does not kill a "battery". Therefore, the tool lasts quite a long time, and in addition to driving an ice drill, a screwdriver is actively used in household repairs.

In addition to Resanta, we can recommend Whirlwind 24L-2K / B. Fairly light screwdriver, only 1.3 kg. Operating voltage 24 V. Equipped with brushless DC motor. Torque 55 Nm. But according to the characteristics, the electric motor turned out to be not as economical as that of the Resanta D20, therefore, to drive the ice drill, it is better to take both batteries included in the kit for fishing. The capacity of each battery is 2 Ah.

Best Chinese

One of the Chinese manufacturing companies has developed and manufactures the SUMITACHI 10101 screwdriver model specifically for driving an ice drill in winter fishing conditions.

The design uses a powerful 25V brushless DC brushed motor. The gearbox develops torque up to 120 N * m. At the same time, the weight of the model is only 1.64 kg. On the case there is an indication of the battery charge; batteries with a capacity of 4 Ah are used for power. An additional handle can be installed on the body to hold the tool. Moreover, it is completely made of metal, and not plastic, like competitors. The price for the model is 16900 rubles, the guarantee from the date of sale is 12 months.

A less powerful but more reliable Chinese Crown CT21075HMX-4 BMC model uses a 20V DC brushed motor. Torque on the gearbox up to 60 N * m.

The fact that instead of a brushless electric motor there is a conventional commutator motor, but more powerful, does not affect the performance of the screwdriver in any way. Crown CT21075HMX is designed for fairly harsh operating conditions with a large discharge current.

Moreover, the system has a gearbox with gears and satellites made of metal. It is almost impossible to break such a gearbox, even if the ice drill jams in the hole. The only condition is that before you work with an ice drill, you need to drive the screwdriver at idle. This will heat up the grease in the gearbox and raise the battery. The capacity of one battery is 4 Ah. So one battery should be enough for two exits on the ice.

If you choose from inexpensive screwdrivers, then the P.I.T. model can be purchased separately to drive the ice drill. PSB20H-13B.

This is a budget, but powerful enough Chinese tool with a brushless electric motor and a torque of 75 N * m. The gearbox is steel, but the housing is plastic. Weight - 1.3 kg. The device is powered by 20 V lithium-ion batteries with a capacity of 2 Ah. The cost of the instrument is 4700 rubles.

Best Inexpensive

The price of a screwdriver directly depends on the power of the engine. The higher the torque on the gearbox, the more expensive the tool.

From inexpensive models for fishing, you can use Interskol DAU13 / 18VK. The torque is 45 N * m, but from practice it is known that it is quite enough to turn the ice screw on ice up to 40 cm.

The advantage of the model is a completely metal gearbox, designed for the most severe operating conditions. The operating voltage is 18 V, in order to drill through the ice while fishing, you will need at least two batteries. Price - 4300 rubles, 1 year warranty.

From the line of budget models for ice fishing, you can use a screwdriver of the Russian brand STAVR ST20UBDA.

A brushless motor is installed in the design, providing a torque of up to 50 N * m. The power tool is powered by a 20 V battery with a capacity of 2 Ah, 4 Ah or 6 Ah. That is, if desired, a triple supply of energy can be made to drive the ice screw. Price - 5300 rubles.

The Makita DHP 482Z model can be considered the best solution from inexpensive screwdrivers. Operating voltage 18 V, conventional brush motor, powered by a 2 Ah battery. In this case, the gearbox provides a torque of 62 N * m on the shaft. The weight turned out to be 1.8 kg. Price - 6800 rubles. This is one of the few models that, at a low price, provides reliable operation with an ice screw at any air temperature.

An ice drill driver should not be too expensive or powerful. Tool for 20-30 thousand rubles. rub. it will be a pity to lose or accidentally burn it while swimming in the hole. Therefore, experienced fishermen take an ordinary tool, select an adapter and a good ice screw for it. But you can also buy the premium version if ice fishing remains the main hobby and way of spending leisure time.

And which of the proposed models would you choose? Share in the comments. Bookmark the article so you don't lose your rating. Perhaps it will be useful when choosing.