The best reciprocating saws: TOP 14, rating of 2023, review, pros, cons, photos, price and quality

Reciprocating saws have appeared in the home arsenals of home-made makers relatively recently. And they have already managed to gain a reputation as an indispensable tool. In terms of its capabilities and technical characteristics, the “saber” is inferior to circular and chain saws. But often there is a situation when you can cut the material only with a reciprocating saw. All other options, except for a manual hacksaw, are powerless.

What to look for when choosing

A reciprocating saw is a slightly modified electric jigsaw. It works on the same principle - a long blade-blade, mounted on the wings of an electric motor, performs reciprocating movements, and thanks to this, a cut is made.

From a jigsaw and a conventional hacksaw, a reciprocating saw is distinguished only by the length of the blade, its shape and range of motion, usually no more than 20 mm. But just because of this, it can cut a pipe or any other part that is closed from two or even three directions. The best reciprocating saws can replace half of the tools in the house.

When choosing a specific reciprocating saw pattern, consider the following:

1. Each model "saber" (cutting blade) can have its own shape and length. For example, DWT often makes straight blades with a wedge end, and the cutting blade of a Hitachi tool is made with a slight curve.
2. During the cutting process, the saw can make simple straight-line movements or perform a pendulum motion. In the latter case, the trajectory of the forward and reverse motion of the reciprocating tool is different. This is important if you need to cut tough material, such as raw wood.
3. The shape of the body can be longitudinal, that is, elongated along the axis of movement of the blade, or pistol, like a jigsaw. In the first case, it is convenient to cut the material with a saw in dead ends and corner areas, in the second case it is possible to cut sheets.

The cutting tool of a reciprocating saw differs in blade material, size and sharpening angle of the teeth. For wood and soft plastics, the blade is made of alloy steel with a large tooth inclined forward along the cut. In the case of metal cutting, the best cordless reciprocating saw blades are made from titanium or heat-treated steels.

Reciprocating saws with an electric drive up to 750 W are conventionally classified as household models. They are not designed for long-term work, they usually saw for no more than 20 minutes, after which the backstage mechanism and the canvas are allowed to rest and cool. "Sabers" with an engine of 1000 W or more are classified as a professional tool.

Electric saws differ in drive. It can be battery powered or mains powered. The first option is suitable for construction work and pruning in the garden in the country, the second is usually chosen for the home workshop.

In addition, most manufacturing companies complete saws with useful additional features:

1. Electronic board for stabilizing the speed of the web under load.
2. The ability to quickly replace the "saber" without a key.
3. Cutting depth adjuster.

As practice shows, some of the additions turned out to be useful and convenient to use, but there are devices that you can do without. Specific equipment is selected depending on the purpose of buying a reciprocating saw. If the main material is wood, then it will be useful to have both a quick-release clamp and a depth gauge. To cut metal, you may need an engine speed stabilizer.

This will come in handy! 20 best hacksaws.

Best Inexpensive Reciprocating Saws

In the lower price segment, you can find quite reliable and easy-to-use models. Usually, developers make inexpensive models from a standard set of components and parts, removing from the design the most complex additional features such as electronic adjustment or pendulum travel.

PATRIOT RS 202 21V

The brand is American, but the production of reciprocating saws is located in China. Cordless electric saw powered by 21 V from Li-Ion or Ni-Cd batteries of UES systems. The main purpose of a reciprocating saw is sawing plastic blanks, lumber, pruning trees.

Design features PATRIOT RS 202 21V:

1. The layout of the body is made for a one-handed grip.
2. Weight - 1.5 kg.
3. The blade is 110mm long, but the travel is limited to 22mm.
4. Cutting depth 80 mm in wood, 10 mm in metal.

In fact, this is a battery-powered analogue of a regular budget jigsaw with a more powerful drive and a convenient “saber” reach. The PATRIOT RS 202 21B can be used as a replacement for a hacksaw and a hacksaw.

DEKO DK RS1000

This is a variant of a simple home electric saw used for small repairs. Despite the low price of 2950 rubles, the reciprocating saw has almost full functionality, typical for expensive models.

The brand is Malaysia, the saw is made in China. Mains power supply, motor power 1000 W. For cutting reinforcing metal for welding, the capabilities of a reciprocating saw may not be enough, but 1000 W is enough to cut a pipe, bracket or cut board blanks.

The best reciprocating saws, value for money

The review includes both little-known instrument brands and well-known brands. In almost every line of models, you can find successful designs of electric cutters and frankly failed schemes. In fact, this is the answer to the question - which reciprocating saw is better to buy.

DEKO DORS 1200

Malaysian brand, but production is located in China. Electric network "Saber" with a motor of 1200 watts. Price - 3300 rubles. There is no pendulum movement, so it is not suitable for the garden, you can forget about pruning trees.

The reciprocating saw is not professional grade, but made with a good supply of power and reliability. Due to the reinforced engine, the saw turned out to be quite heavy, 2.63 kg.

Main characteristics:

1. Longitudinal blade travel - 28 mm.
2. The maximum cutting depth in solid wood is 100 mm.
3. There is an engine speed stabilizer.
4. There is a smooth (momentless) start.

The blade stroke frequency can be adjusted to suit specific material properties. There is a keyless panel clamp. The reciprocating saw is not intended for precise cutting of building materials.

This is useful! TOP 22 best power saws for home and work.

PARMA PS-01-210/1300

The electric saw of the Russian development, is produced in the People's Republic of China. It is positioned as a universal household level cutting tool. Reciprocating saw power 1300 watts. Price 4945 rubles.

Features of the reciprocating saw PARMA PS:

1. The engine is commutator, made in China, so the brushes and bearings are suitable from any analogue of the same power.
2. The body is elongated, there are no additional handles that make it easier to hold the reciprocating saw with your hands.
3. Weight 3.9 kg.
4. There is a pendulum move, so with a network "saber" you can cut the shrubs near the house.
5. The blade stroke is 28 mm.
6. The maximum depth of the cut in solid wood is 210 mm, for metal - 10 mm.
7. There is a backlight.

In addition, the design has a keyless blade fixation, there is only a soft start and a system for stabilizing the shaft rotation speed under load. For a household-level reciprocating saw, this is more than enough.

Ryobi ONE+ RRS1801M

Brand Japanese, reciprocating saw is made in China. The battery model has a good build quality. Price 4100 rubles. For a "saber" on batteries, 18 V will be well deserved.

Tool Features:

1. Case type - longitudinal, for one hand a pistol-type handle, for the second, a grip is provided with the palm of the case.
2. Weight - 1.9 kg. The reciprocating saw turned out to be light enough to work as a tool on weight even with outstretched arms.
3. There is an electronic speed control of the engine, a brake for a quick stop.
4. The maximum depth washed down in wood is 180 mm, in metal 6 mm.

The design of the reciprocating saw is such that it is equally convenient to cut the edges of lumber, cut sheets of plywood and cut branches on trees. You can use batteries from any RUOBI tool with a capacity from 1.5 Ah to 5 Ah. The total battery life at 30% load is between 15 minutes and 40 minutes.

The manufacturer's warranty for the reciprocating saw is 60 months from the date of registration of the purchase.

The best professional reciprocating saws

A tool for professionals does not have to be extremely powerful, equipped with all possible auxiliary functions. Most often, reciprocating saws of this class are subject to more stringent requirements for reliability, the ability to work with overload.

Makita JR3051TK

One of the best models of high-end reciprocating power saws. Outwardly, Makita is not much different from the same AEG or Pioneers, but the quality of the mechanical drive backstage is good balancing and, most importantly, the characteristics of the torque of the electric motor make the Japanese "saber" the leader rating.

Makita JR3051TK does not have a soft start and an electronic speed control. Its power of 1200 W is only slightly more than that of inexpensive Russian and Chinese models. But the possibilities are much higher. For example, the depth of cut in a metal pipe is 130 mm, and in wood - 250 mm. It is possible to adjust the depth of cut and change the blade on a reciprocating saw without using a key.

Another plus - Makita JR3051TK easily withstands the most extreme load. The price of a reciprocating saw is 17,100 rubles, while the warranty is only 1 year.

Bosch GSA 120

Reciprocating saw in the same class as the previous Makita. The power of the reciprocating saw is 1200 W, there is no speed control board, soft start and pendulum motion. Bosch GSA 120 is not designed for cutting branches and cutting blanks for repairing home furniture. This is primarily a reciprocating saw that can cut heavy materials throughout the working day.

A feature of the Bosch GSA 120 is the special design of the gearbox, thanks to which the gearing works with less loss and does not heat up so much. The reciprocating saw can cut a steel pipe up to 120 mm in diameter, make cuts in a package of boards up to 220 mm deep.

The price for Bosch GSA 120 is 11400 rubles, 1 year warranty.

AEG US 900 XE

The tool was developed by engineers of the German "Allgemeine Elektricitäts Gesellschaft" as a light, all-round professional power saw. Reciprocating saw power - 900 watts. A special nozzle-stop makes it possible to equally well perform cutting of sheet material up to 16 mm thick.

Weight 2.9 kg. The grip design allows you to work with one hand. reciprocating saw The AEG US 900 XE is often used on roofs to replace window frames and wall cladding. There is a pendulum move, so you can work with any materials. At the same time, the function is switchable, it is much more convenient to cut metal without a pendulum.

The design provides for the possibility of quick replacement of the canvas. Cutting depth on steel pipe 160 mm, on wood 220 mm.

The price is 14900 rubles, the guarantee is 5 years from the date of registration of the purchase.

The best battery operated reciprocating saws

Most "sabers" for professionals have mains power. This is a justified decision, especially if you need to cut a lot and for a long time with a reciprocating saw. For home work, the option with batteries looks more attractive, since a reciprocating saw can always be used outside the apartment - for a summer house or a country house.

Model Ryobi ONE+ R18RS7-0

In design and body design, Ruobi R18RS7 is similar to cheaper models of the Japanese brand. The Ryobi ONE+ R18RS7-0 uses 18V batteries ranging from 1.5Ah to 5Ah. The operating time depends on the charge. According to the manufacturer, the smallest battery can make 70 through cuts on a two-inch board up to 100 mm wide. On a five-amp battery, respectively, 280 cuts.

Characteristics:

1. Weight 2.6 kg.
2. Stroke 30 mm.
3. The cutting depth limit is 210 mm in wood and 20 mm in metal.
4. The maximum cut on a pipe is 100 mm.

The reciprocating saw has a pendulum stroke, soft start, backlight. The support pad can be adjusted to change the working area on the web. Since the stroke of the blade is only 30 mm, only a small section of the blade (3 cm) wears out without reconfiguring the support.

The price is 11100 rubles, a guarantee of 5 years.

Saw WORX WG894E.5

The reciprocating saw model was developed in Germany. One of the best in terms of the layout of the body and the backstage drive. The WORX WG894E.5 electric saw is notable for its low weight - only 960 g, as well as high-quality assembly of mechanics. In addition, the “saber” has a radically redesigned design, a pistol grip has been added. This means that any adult can operate a reciprocating saw with one hand.

The drive power of the WORX WG894E.5 is about half that of conventional models. But its capabilities will still be enough to cut a branch with a diameter of 60 mm or reinforcement with a thickness of 10 mm. The maximum diameter of a steel pipe that can be cut with a "saber" is 120 mm. For home or for pruning in the garden, this model will be the best solution.

The only drawback is the lack of a pendulum stroke. But, given the small weight of the reciprocating saw, it is possible to cut raw wood without a pendulum.

The price of the saw is 11457 rubles, the guarantee is 24 months from the date of purchase.

DEWALT 18V XR DCS367N

Powerful reciprocating saw of universal type. Usually model DEWALT 18 V XR DCS367N is purchased on the eve of a major overhaul in a house or apartment. At the same time, the capabilities of the “saber” make it possible to use it as a full-fledged working tool when laying roof lathing, cutting foam blocks, but most often for cutting pipe blanks.

Characteristics:

1. Weight 2.3 kg.
2. Powered by batteries 18 V, capacity 2 Ah.
3. The cutting depth of metal is 10 mm, wood - 300 mm, pipes - 150 mm.
4. It is possible to fine-tune the web speed using the built-in electronic adjustment board. Plus a brushless motor that is not afraid of overheating.

The layout of the body of the electric saw is such that the tool is not afraid of falling. The chances of breaking the canvas are small. But if you work on the roof, it is better to use an additional safety cord. The resource of the reciprocating saw is quite large, with proper maintenance, cleaning and lubrication of the drive, the backstage mechanism can work for 12-15 years.

The manufacturer gives a 2-year warranty. Price - 21 thousand rubles. rub.

The best corded reciprocating saws

Power saws with mains supply make up about half of the range of reciprocating saws sold. It's often easier to buy an extra 25-50m power strip, and it's three times cheaper than buying a couple of new batteries.

Makita JR 3070 CT

One of the most powerful models in the Makita range of electric saws. Electric motor power 1500 W with a total tool weight of 4.6 kg. "Saber" turned out to be heavy, but it easily cuts almost everything that can be found in the country, in the workshop or in the garage.

There is a pendulum stroke, and the design of the mechanism allows you to adjust the deflection of the web in four positions. You can cut almost any material - from raw acacia trunks to rebar and stainless steel.

The second adjustment point for a reciprocating saw is the blade speed. In this model, tuning is performed smoothly using an electronic unit. Stroke 32 mm. That is, a reciprocating saw can easily cut a pipe up to 130 mm, a block of wood 255 mm or metal to a depth of 13 mm.

It may seem that Makita JR 3070 CT is too powerful for the home workshop. In fact, no, its resource is enough for 30 years of trouble-free operation, and this is beneficial in any case.

HITACHI CR13V2

One of the best models of reciprocating saws focused on cutting metal, most often round billets, fittings or pipes. Instead of the traditional pendulum stroke, Hitachi engineers made the blade move in an arc. This is how the blade moves when working with a hand saw for metal. To increase the durability of the canvas, it also had to be made slightly curved. As a result, the Hitachi CR13V2 saw cuts pipes and fittings much faster and with less strain on the hands than traditional electric saws.

Characteristics:

1. Weight 3.2 kg.
2. The power of the collector electric motor is 1010 W.
3. There is an electronic speed control.
4. The course of the web is 3.2 cm.
5. The cutting depth in wood is 30 cm, in metal - 1.9 cm, for a pipe - 13 cm.

This is a simple and reliable version of the "workhorse" without unnecessary features. The only downside to a reciprocating saw is the blades. No other models, except branded Hitachi, will fit the "saber". The price of an electric cutter is 12 thousand rubles. rub, 1 year warranty.

Skil 4900AA

The developer of the tool, the Dutch company SKIL, positions the saw as a universal electric saw. In practice, it turned out that Skil ideally cuts any wood and plastic. It can also cut metal up to 30 mm thick, but it has no equal in cutting and cutting any lumber, trimming branches and dead wood.

The motor power is only 1050 W, the blade stroke is 28 mm. The limit cut for wood is 180 mm, for steel 20 mm, aluminum alloys up to 30 mm, for a pipe 150 mm. It is possible to adjust the depth of cut, but this will have to be done using a special key. This scheme provides greater reliability of the scenes and latch.

Price 13 thousand. rub, 2 year warranty.

This will come in handy! TOP 24 best miter saws.

Understanding what the best reciprocating saw should be comes after a little experience with the tool. First of all, you need to choose the shape of the body and handle. A comfortable grip is one of the main conditions, since the “saber” often has to be worked with outstretched arms, or holding the tool in the air.

Tell us about your experience with reciprocating saws - what features of the tool should you pay attention to? Bookmark the article so you don't lose our rating.