Do-it-yourself headboard: how to make, types, photos, materials, step-by-step instructions for creating a hard and soft structure

When arranging the interior of a bedroom, the head of the bed often becomes a bright accent. It's easy to make it yourself. Choose a rigid or soft design, depending on the overall style decision and the desire to get additional comfort.

Possible Implementations

At the preparatory stage, you need to decide what shape the updated headboard will be. Analyze photographs, evaluate a variety of beautiful ideas. This will allow not only to make a functional element of the interior, but to bring an unusual bright accent into the atmosphere of the bedroom.

Wooden headboard with shelves

This decision leads to an increase in usable space. A convenient shelf above the bed is used to place frames with commemorative photos and other small souvenirs. Sconces are easily mounted on a wooden headboard. Small shelves below serve as a replacement for bedside tables.

Slatted headboard

The natural texture of wood, emphasized in the strict horizontal direction of the sanded laths, goes well with the contrasting finish on the wall. The lighting adds an extra touch of charm. A lamp is placed on a small lower shelf.

Wicker headboard

Unusual design option beds involves the use of a dense rope. You can take, if necessary, yarn, which in shade matches the style solution of the bedroom interior.

The easiest way to weave is "basket". The yarn is stretched onto a pre-fixed rectangular frame, interlaced alternately in a checkerboard pattern.

From cuts

The original headboard is easy to make using saw cuts of trees of different diameters. They should be sanded down. Then the wood is impregnated with special compounds that provide protection against decay and fire.

The final layer is a transparent varnish. Frame the composition.

mosaic fantasy

You can make a colorful, refreshing bedroom interior headboard for the bed in the form of a mosaic panel. The basis for it is a sheet of plywood of the right size.

Mosaic fragments can be obtained from fragments of tiles. Liquid nails are suitable for fixing them. After gluing is completed, the seams are filled with a special grout. Frame the panel with a frame.

fine carving

For the manufacture used different wood species. After carving and polishing, a beautiful openwork canvas is obtained. Such a headboard will decorate the most modest bedroom. But it requires systematic care, which consists in updating the polish. To clean this design of the bed, special tools are used.

Mirrored headboard

This option should be used in small rooms, as the reflection in the mirror panels visually enlarges the space. The dimensions of the mirrored headboard can be different, reaching the ceiling in some cases.

The mirror is glued to a solid base, leaving free space around the perimeter for the frame. It is often made from wood. If you want to make the decor more vivid, lay out a mosaic ornament, glue beads, shells or other design elements.

With mirror frame

An interesting nuance to the bedroom, designed in a strict achromatic tone, is introduced by a headboard made of rectangular panels covered with eco-leather, framed by a frame with mirror tiles.

This design technique gives completeness to the interior, diluting its conciseness. It turns out a cozy, with notes of sophistication space.

Painted headboard

If the walls near the bed are painted in a light tone, painting becomes the easiest way to decorate the headboard. For independent execution, it is easy to purchase ready-made stencils.

It is convenient to apply paint of the desired tone from spray cans, covering the floor and bed with a film. Even a modest drawing becomes a decoration of the bedroom, if done carefully.

wall stickers

Ready-made stickers will allow you to make an original note when decorating the headboard. They are easy to stick on the painted walls near the bed. The right shade of this headboard option decorates the room, attracting with interesting interweaving of lines.

Wrought iron headboard

Openwork motifs, enclosed in durable cast iron, bring back the feeling of antiquity to the bedroom. Such a headboard fits into interiors of different stylistic solutions. Looks fresh and romantic.

Headboard-photo frame

Favorite photos of landscapes, memorable places, framed with neutral mats, will serve as an elegant design option for the wall section behind the bed. It will turn out a kind of headboard, which you can admire, remembering memorable moments.

Another advantage of this method is the ability to replace the photo if necessary, periodically updating the exposure by the bed.

Lace headboard

Delicate openwork lace, used to decorate the headboard, fits well into the interior of the bedroom, designed in light pastel colors. For the manufacture will require a plywood base. You can put foam rubber, which will provide a more voluminous look of the back.

To make white lace more expressive, you can glue a plain fabric of the desired shade on the foam rubber under it. Fasten fabric parts to plywood with a construction stapler. Without foam rubber, lace on a flat base will resemble a decorative panel.

Canopy headboard

The canopy design provides a more comfortable, cozy environment. For fastening use a reliable base. The fabric is selected more often in accordance with the design of the window.

A canopy for a bed can be light, airy or densely draped. You can fix this design on the ceiling if you plan to use long canvases. A more compact canopy is easily fixed on the wall.

Solid wood back

An easy-to-manufacture design, made up of sanded boards, glued laminated timber, is suitable for an interior with elements of country style, Provence. You can use MDF, chipboard, chipboard panels, provided with an additional protective layer.

The shape of such a headboard is predominantly strict, often rectangular. Wood is varnished to highlight the natural texture.

Headboard-wardrobe

This solution is practical. Installing a structure with shelves and additional storage space at the head makes the sleeping space more comfortable and orderly.

For children

Making a wooden headboard baby bed, trying to make the design not only convenient, but also safe. It is supplemented with side walls that protect the baby from accidental falls.

Back - "fence"

From an ordinary lining, it is easy to create a headboard that resembles a fence. The upper ends of the planks are sharpened, and then semicircular fragments are cut out along the edges. The parts are nailed, forming a fence, onto the crossbars.

If desired, you can replace the lining for reliability with a polished picket fence. After assembly is completed, a protective varnish layer is applied.

Knitted headboard

An interesting design for the bed can be knitted. Use a thick hook and a dense elastic cord. If you own a crochet, a panel of the right size can be made in a few days. Fix it on the dowel.

Headboard - "curtain"

You can even decorate a section of the wall behind the bed using curtain fabric with expressive geometric patterns. An interesting solution is the use of a fabric similar to the curtains on the window. For fixing, an ordinary window cornice is fixed on the wall.

Rope decor

To create an unusual headboard, you only need a strong rope with a silky texture. Circles are knitted from it with a thick metal hook.

The technology is simple, involving an increase in the number of loops at regular intervals in each subsequent row. The details are tight. But if required, fix them on a base of thick cardboard, and then form a decor on the wall near the bed. For fixing, a crate is preliminarily made.

High padded panels

Panels laid with foam rubber and covered with velvet fabric that reach the ceiling fit well into the spacious bedroom. Such a decision requires compliance with the compatibility of the main shades. When balance is achieved, the interior looks complete.

Storage systems

If you hang an organizer from a perforated base, complemented by mesh shelves, hooks, above the bed, you get a convenient place for small things. Frames with commemorative photographs, interesting drawings, various handicrafts are strengthened here. It is important that there are no heavy objects on the organizer, and that the rest of the exhibits are securely fastened.

The original headboard, for which open books served as material, will not leave people indifferent. They are selected by size and fixed on a plywood base. Then fix the panel on the wall.

Moss headboard

The panel, created from artificial moss and enclosed in a wooden frame, creates a bright decorative accent in the atmosphere of the bedroom. The natural texture goes well with different types of finishes.

Step-by-step instructions for creating a solid headboard

If desired, it is easy to make a comfortable solid headboard with your own hands. At the preparation stage, a drawing is developed that will allow you to more accurately select the material and cut it into individual parts.

Choosing a material

The headboards for the bed are often made of wood. For work, you need to prepare suitable slats. They can be purchased at a hardware store.

You will also need:

• jigsaw (it is more convenient to work with an electrical appliance);
• screwdriver;
• drill;
• self-tapping screws.

Making a headboard

Before work, study the master class so that when performing all operations on your own, you will not make mistakes.

The following step-by-step instruction will also allow you to solve the problem:

1. Markup. It is not always possible to obtain strips of the required dimensions. In such a situation, the boards must be marked out, making the width of future planks 7-8 cm. In total, they will need 9 pieces 2 meters long. It is also necessary to leave 4 strips for the shelves, about 20 cm wide. Their length is left within 40 cm. Provide for the preparation of 3 crossbars. Their exact length is determined after all the planks are laid out on a plane. You will need 4 more bars for a frame with a length of at least 2 meters.
   
2. Cutting details. According to the marked marks, the boards are trimmed. A jigsaw speeds up this operation. It is important then to sand with sandpaper not only the cuts, but also all other surfaces of the planks, eliminating burrs.
   
3. Layout. Planks are placed on a flat horizontal surface. So that the interval between them is the same, fix it with scraps of a board of the required thickness.
   
4. Crossbar preparation. To securely fasten the planks, you will need to cut 3 transverse slats from pre-prepared boards. Pick up self-tapping screws so that after screwing in they do not pierce through 2 parts laid on top of each other.
   
5. Screwing planks. Using a piece of board to fix the same interval, alternately screw the planks to the crossbars. Perform this action then on the other side and in the center of the lattice.
   
6. Frame hardware. When the main lattice is assembled, a frame of wooden slats is attached to it around the perimeter from the front side. Holes for secure fixation with self-tapping screws are made at an angle. You can leave such a headboard without a frame.
   
7. Setting the backlight. To enhance the decor, an LED strip is fixed around the perimeter on the wrong side of the assembled rack frame. Fix the mechanism of its inclusion. It is possible to provide diodes of different shades, supplemented by a controller. This device, in accordance with the program, changes the tone of the lighting, adding a touch of mystery.
   
8. Headboard decoration. Fix the lattice frame behind the headboard. The design looks light, and the backlight enhances its appeal. Boards prepared for shelves are easily inserted between the planks. This allows you to install shelves in any convenient place.
   

If a darker shade is required for the interior, a stain is used. Then, after it is completely dry, a varnish coating is applied. The tree is also easily painted if necessary.

How to attach a solid headboard to a bed

There are several ways to install a rigid headboard.

Attached

The manufactured massive structure is installed without additional fasteners. The attached headboard is supplied with stable legs or is made in the form of a chest of drawers, cabinet, rack.

Such options are often equipped with convenient storage places. They are not suitable for a small bedroom, as they take up a lot of usable space.

hinged

Practice for fixing a solid headboard to the wall behind the headboard. Depending on the weight, self-tapping screws, dowels or anchors are used. Can be mounted on special canopies.

Stationary

This technology involves fixing the manufactured rigid headboard directly to the bed. Use different types of fasteners. More often choose screws or bolts.

It is not always possible to purchase wooden planks. In such a situation, a laminate headboard left after laying the flooring becomes a good option. The combination of 2 surfaces in tone and texture gives the interior completeness.

First, a wooden crate is made, which can be immediately attached to the wall. Laminate panels are fixed on it. The first bottom plate is fixed with shoe studs. Then the lamellas are laid, fixing them with locking joints. If necessary, carnations are driven in along the edges for reliability. It turns out a smooth coating on which the joints remain invisible.

Step-by-step instructions for creating a soft headboard

To enhance the feeling of comfort, it is worth making a soft headboard. There are many ways, but the main one is the use of fabric and filler.

Choosing a material

You need a solid base. They make it more often from plywood, but you can also take wooden boards.

If you plan to make a soft headboard using the “carriage coupler” technique, then you will also need:

• fabric of the desired shade - it must be durable and easily draped, eco-leather is also suitable;
• furniture buttons;
• synthetic winterizer;
• foam rubber - use plates with a thickness of at least 5 cm;
• glue - a special composition recommended for foam rubber is suitable;
• long needles;
• furniture stapler;
• stationery knife;
• a drill equipped with a “tsifenbor” nozzle - it will allow you to make even holes in the foam rubber;
• drill;
• scissors;
• strong threads.

Making a headboard

When working, accuracy is required so that the stacked folds are uniform.

Step-by-step instruction:

1. Pattern selection. The decor pattern obtained using the "carriage coupler" technology is often made diamond-shaped. Sometimes in the form of squares.
   
2. Drawing development. On a separate sheet of paper, focusing on the dimensions of the future headboard, markup is made. It will allow you to more accurately transfer lines to blanks made of plywood and foam rubber.
   
3. Foam preparation. Cut out the foam to the desired size. The marking of rhombuses is transferred to it in accordance with the drawing. For control, a template of one rhombus is cut out. It will help to check the accuracy of the markup. Apply the template to the marked surface, checking the vertical and horizontal direction. Using a "tsifenbor" - a special crown mounted on a drill, even round holes are made at the tops of the rhombuses.
   
4. Plywood marking. Saw out a plywood blank in accordance with the size of the foam rubber. Transfer markup. For accuracy, it is worth drawing a plywood base, making lines exactly according to the drawing. Sometimes the parts are combined, and then marks are made on the plywood through the holes in the foam rubber, but this method can lead to deviations, which negatively affects the picture as a result.
   
5. Drilling holes. Using a drill equipped with a drill of the required diameter, holes are made on the plywood blank. They are also located at the tops of the marked rhombuses.
   
6. Foam bonding. Glue is evenly distributed on the plywood base. Apply foam rubber, making sure that the holes on both parts match. Pressing lightly, smooth the foam rubber with your palms, making sure that it sticks well.
   
7. Fastening the synthetic winterizer. A synthetic winterizer is cut out with a margin of at least 15 cm on all sides. Spread it evenly on the foam rubber. The workpiece is turned over. The edges of the synthetic winterizer are fixed on a plywood base with a stapler. The corners are neatly turned. Then the excess padding polyester is cut off.
   
8. Surface preparation. On a stretched synthetic winterizer, you need to make holes. Given the fibrous nature of the thin tissue, this operation is performed with the fingers. They find a hole in the foam rubber and carefully push the synthetic winterizer apart in this place.
   
9. Execution of a screed. A piece of fabric is spread on the base. The thread is threaded into 2 long needles. They are inserted into the extreme hole. Then you need to move to the opposite side.
   
10. Thread fixation. After removing the threads, the fabric is pulled, and their ends from the inside on the plywood are securely fixed several times in a zigzag fashion with a stapler. The excess is cut off.
    
11. Fastening fabric. In the course of the screed, gently straighten the folds. Make sure they are the same. After completing the pattern, the edges of the canvas are rotated, trying not to change the direction of the pattern. On the inside, the fabric is fixed around the perimeter with a stapler. The corners are folded over without any folds.
    
12. Fastening buttons. Using a similar method - using 2 needles with a thread, which is first passed through the eye of the buttons, they are fixed in each hole.
    

At the finished headboard for the bed, the wrong side is covered with fabric to give a finished look. Choose a non-stretch material. The finished headboard is installed in the allotted place.

How to attach an upholstered headboard to a bed

More often, direct fixation of the headboard, made, for example, using the "carriage coupler" technology, to the bed frame is used. Fasten the soft wall with bolts and nuts.

You can nail a soft headboard on a wooden or plywood base to the wall. Then they move the bed.

They also make add-on structures. Such soft upholstery for the bed does not require additional fasteners. Legs provide stability.

An easy-to-make upholstered headboard for a pillow bed can be fixed with long loops on a wall-mounted rod.

If a double bed requires a reupholstery, a new headboard cover can be sewn from jacquard or velvet fabric. Foam rubber is glued to the back, and then fitted. This is the easiest and most affordable method.

A headboard of any shape enhances the decor of the bed. A soft or rigid design is chosen depending on the planned increase in comfort and the created interior style solution.

Do you think it is worth making your own headboard for the bed or is it better to buy it ready-made? Share your opinion in the comments. Bookmark this article so you don't lose useful instructions.