Chainsaw bar length as measured correctly

For those who have ever seen a chainsaw in action, there is no secret what a tire is required for. It directs the chain, contributes to its tension and lubrication. To competently replace in the event of a breakdown or the need to change detail device, you need to know its width. Let's figure out how to find out tire sizes.

The content of the article

  • How to correctly measure the length of a chainsaw bar?
  • How to determine the length of the chainsaw bar?

How to correctly measure the length of a chainsaw bar?

There is an extensive selection of guides for a gasoline engine chainsaw in stores, but there are several parameters according to which they need to be selected:

  • groove width;
  • tire size;
  • shank;
  • sprocket pitch.

The main one is the parameters of the canvas. Its length directly indicates the depth of immersion in the workpiece during sawing. In addition, the appropriate chain is selected in relation to the size.

By default, it is indicated in inches. The value is indicated on the blade itself, closer to the shank.

instagram viewer

When contacting a specialized store, consultants will definitely tell you which part is better to take in accordance with the tasks for the chain saw. The values ​​shown in the table below are considered standard and determine the number of links in the installed chain.

Chainsaw saw blade size chart

@instrumentoria.ru

For household appliances, it is not recommended to install a canvas more than 45 cm in length. This will increase the load on the engine and reduce the life of the device. Some unscrupulous suppliers complete the tool with a saw blade with large parameters in order to attract the attention of buyers, but this is wrong.

If you install a 38 cm tire on such a saw, it will work much faster and easier.

How to determine the length of the chainsaw bar?

The cutting part is far from the entire length of the saw blade. The distance is measured from the front of the tool body to the rounded end of the chain mounted on the bar. The resulting value is rounded to centimeters or inches, it is equal to 2.54 cm. Further, according to the table below, it is calculated which size is suitable for a particular tool.

If, going to the store, you doubt your ability to accurately determine the size of a chainsaw tire, take the tool with you or provide the consultant with a product passport, which usually indicates the main options.

Camera Stand: Rules for Choosing a Camcorder Stand – Setafi

Camera Stand: Rules for Choosing a Camcorder Stand – SetafiHomeElectronics

The camera support allows you to comfortably hold even a large device and take high-quality shooting, including while driving. To select a suitable device, it is necessary to take into account its ...

Read More
How to connect a 380 volt heat gun? – Setafi

How to connect a 380 volt heat gun? – SetafiHomeUncategorized

e-csu.com.uaConnecting a heat gun is not difficult when there are detailed instructions for using the device. It doesn’t matter if it’s a gas or diesel model - in our article we will analyze each o...

Read More
Mosquito trap: buy or make your own at home - Setafi

Mosquito trap: buy or make your own at home - SetafiHomeUncategorized

Nobody likes insects. If not to anyone, then at least to the majority. They make noise, buzz, interfere, carry diseases, bite - in general, unpleasant. If you do not live in places with constant co...

Read More