Error 0 Tricolor: what it is, how to fix it and what to do - Setafi

There are several ways to fix the 0 Tricolor error. The easiest option is to reboot the receiver after waiting a few seconds or minutes. If this does not help, it is recommended to check the power supply, antenna, settings. The main causes and solutions to the problem are described in the material presented.

How the error is decoded

You need to start by understanding what error 0 Tricolor TV means. This malfunction occurs quite often, so many users encounter it. It means that the receiver cannot decode the incoming signals, which is why the channels do not work.

Therefore, it is clear what to do with an error of 0 on Tricolor. In most cases, the malfunction can be fixed independently, that is, without contacting a specialist. The sequence of actions depends on the specific cause. But it is important to remember what to do with error 0 on Tricolor in the first place:

1. Check the signal strength and quality scale.
2. If necessary, adjust the antenna.
3. Turn off the receiver for a few seconds and turn it on again, that is, reboot.
4. Error 0 on Tricolor is eliminated by connecting the equipment to the network through your personal account.
5. If this is not possible, it is recommended to check the power supply by measuring with a multimeter.
6. Next, you should make sure that the cable connection is made correctly, the contact is tight, the cable does not move away from the connector.
7. If Tricolor still gives a zero error, you need to check the integrity of the cable itself.
8. Lastly, inspect the converter with the antenna for damage.
9. If this does not help, you need to establish a specific reason, which means error 0 on Tricolor, and act in accordance with the instructions. The most common cases are described below.

System failure

One of the main ways to fix error 0 Tricolor TV is to simply reboot:

1. Disconnect the equipment from the network.
2. Wait a few minutes.
3. Then turn it on again and check the operation.

If this helped, then error code 0 Tricolor appeared due to a hardware malfunction associated with a recent power outage. It is possible that because of him household appliances stopped working.

Power supply failure

You also need to understand what to do if Tricolor does not show error 0. In this case, you should check the power supply. This is not always easy to do, because even if the green indicator is on, the equipment may actually fail.

To reliably diagnose the cause, you should take a working power supply from another device and connect it. It is quite clear that if the code disappears, then the reason is connected precisely with the block. It remains only to replace it with a new one or repair it.

Old software version

Considering further what to do if Tricolor shows error 0, one can single out such a reason as outdated software. Usually a similar phenomenon is observed if the receiver is not updated in a timely manner.

The removal instructions are as follows:

1. Check the version of the program by pressing the "STATUS" key on the remote control.
2. On some models there is no such button, but there is a “Tricolor TV” - then they click on it.
3. It is clear what error 0 means in Tricolor. If an inscription about the need to update the software appears on the screen, you need to do this by following the prompts.
4. Modern models are quickly rebuilt to new versions - no additional action is required. Moreover, it is important to take into account that the process goes in 2 stages - first, the receiver software is updated, then the software of the module itself.
5. If the receiver was bought a very long time ago, it may not be able to complete the update. In this case, you should contact the company's hotline.

Bad signal

When answering the question of what to do if Tricolor writes an error of 0, you need to take into account such a factor as an insufficiently high-quality signal. This is often seen in bad weather, especially in rural areas.

But even if the weather conditions are normal, a code may still appear on the screen. And then you have to figure out what error 0 on Tricolor is. In this case, the cause may be an incorrectly configured plate or creases, or other damage to the cable.

The solution path is as follows:

1. Take the receiver control panel and press the red and blue keys in sequence.
2. 2 scales will light up on the screen - check that each one is at least 2/3 full.
3. Next, you should study what error 0 means. If it has arisen again, it is recommended to inspect the plate and, if necessary, remove debris from it, adhering snow.
4. Then it is slowly moved in different directions, finding a position in which the scales are filled to the maximum.

Reset activation keys

Another reason why Tricolor does not show error 0 is that the activation keys have ceased to be valid, that is, they have been reset. This is observed if the receiver has not been used for a long time - 5 days or more. Also, the reason may be related to late payment.

To understand what error 0 means on Tricolor TV, you should act like this:

1. Turn on any scrambled channel and leave the system on for a few minutes. And the TV itself can be turned off.
2. If during this time (maximum one hour) the air has not been restored, send a request for re-activation through your personal account (the "Reactivation" command) or by calling the hotline.
3. Another option is to contact the dealer.
4. Another way to fix the 0 Tricolor TV error yourself is to go to the receiver's menu through the remote control. First, press the "Tricolor TV" key, then select "Repeat activation command".

Payment not made

Error zero on Tricolor TV also appears in the absence of payment. Or the money was deposited, but for some reason they have not yet been credited to the account. You can check it yourself by doing the following:

1. Check if there is an active subscription to the previously selected package.
2. Make sure the service is currently active.
3. Log in to your personal account and check the "Check Subscriptions" section.
4. Contact the company hotline.
5. If you need to make a payment and leave the receiver on, the code will soon disappear automatically.

Incorrect smart card installation

Next, you need to figure out what to do if Tricolor TV gives an error 0. One reason could be a problem with the smart card. It's quite easy to verify this:

1. Press "STATUS" on the remote control (on new models - "Tricolor TV").
2. See the card number on the screen (it matches the receiver ID number).
3. If there is no number, the message "no card" will appear. In this case, check the correctness of its installation.
4. If the card is placed correctly, you need to remove it, wipe it gently and insert it again, sliding it all the way.

If the error 0 Tricolor has been and remains, the last way remains - reset all settings. Then they will be updated to the state that was after the factory installation.

The above describes all the main reasons why Tricolor gives an error 0, as well as how to fix it. If no case fits, it is better not to waste time, but simply call the hotline. Most problems can be easily solved over the phone. In some cases, you will have to call the master at home.